project tin can shootin for 9's
02-07-2009, 12:52 AM
#182
a turbo mod would not utilize the lid...
OP i have gotten a bit of flack about weighing the options of powerplants and my feeling is it's still GM hell even ford boys are doin the same:
way easier tunning,more power to be made due to head design plus a few other ways. this is not disrespect to the Lt1 this is makin me happy on my dime
OP i have gotten a bit of flack about weighing the options of powerplants and my feeling is it's still GM hell even ford boys are doin the same:
way easier tunning,more power to be made due to head design plus a few other ways. this is not disrespect to the Lt1 this is makin me happy on my dime
02-07-2009, 09:04 PM
#184
On The Tree
Join Date: Jun 2007
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
02-08-2009, 11:14 AM
#188
10 Second Club
iTrader: (1)
Join Date: Jan 2003
Location: Chicagoland Area
Posts: 1,516
Likes: 0
Received 0 Likes
on
0 Posts
Looking good Jerry. I got the 4L60e in with the Circle D converter and it feels great a lot more responsive than the TH400 it was cold and damp out so I couldn't get on it to hard.
Thanks again.
Thanks again.
02-08-2009, 07:53 PM
#190
.
I would like to do what T UNIT has done and get a LS based engine but this car will stay LT1 to the end. 
__________________
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
02-15-2009, 02:40 PM
#191
some updates...
--still waiting on parts to come in. Got the ls6 intake manifold with aeromotive fuel rails, 60lb injectors, stock ported TB. Also a little pimp factor, we pulled out the top tube and tapped it so i can run my boost gauge off of it. So no extra bungs welded on the turbo piping and i made use of that hole...
--Yella Terra shaft mounted 1.8 rockers
--Custom one-off aluminum th350/lsx crossmember made by Eric@midwest chassis
--Stock style sumped aluminum gas tank which will have a aeromotive A1000 pump feeding the 60lb injectors. I should have enough fuel for anything i put in there..
--still waiting on parts to come in. Got the ls6 intake manifold with aeromotive fuel rails, 60lb injectors, stock ported TB. Also a little pimp factor, we pulled out the top tube and tapped it so i can run my boost gauge off of it. So no extra bungs welded on the turbo piping and i made use of that hole...
--Yella Terra shaft mounted 1.8 rockers
--Custom one-off aluminum th350/lsx crossmember made by Eric@midwest chassis
--Stock style sumped aluminum gas tank which will have a aeromotive A1000 pump feeding the 60lb injectors. I should have enough fuel for anything i put in there..
