project tin can shootin for 9's
No really recent updates, just got my 15x10s on the back with a 28x10.5 et drag. With the narrowed rear they sit perfect in the wheel well. I'm gonna hopefully roll it out this weekend n clean it up n take some quality pics. I close on my house next week so money will be slim so updates will be few n far between.
No really recent updates, just got my 15x10s on the back with a 28x10.5 et drag. With the narrowed rear they sit perfect in the wheel well. I'm gonna hopefully roll it out this weekend n clean it up n take some quality pics. I close on my house next week so money will be slim so updates will be few n far between.
haha thanks Rob!
a little udate here.....
Havent got around to do much on it while in my house buying move. So i got all my loose ends tied up with the car after getting the rear narrowed and buying new rear rims 15x10's and got the car back to a roller and all my parts on it. All i have left if fuel system and wiring. So in the meantime iv been keeping it clean etc. However now im back on my feet after buying my house so im gonna strt back on it. Gotta buy a regulator and fuel line next and tat will be all done then a harness and it should be time to fire up! Heres the most recent pics of it all cleaned up and done....
Havent got around to do much on it while in my house buying move. So i got all my loose ends tied up with the car after getting the rear narrowed and buying new rear rims 15x10's and got the car back to a roller and all my parts on it. All i have left if fuel system and wiring. So in the meantime iv been keeping it clean etc. However now im back on my feet after buying my house so im gonna strt back on it. Gotta buy a regulator and fuel line next and tat will be all done then a harness and it should be time to fire up! Heres the most recent pics of it all cleaned up and done....
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Looks great man! Should be a beast when it's finished up. 
Reminds me a lot of my own car; black LT1 car w/ LS engine, 28x10.5's out back with narrowed rearend, 10pt cage lol....
Mike
Reminds me a lot of my own car; black LT1 car w/ LS engine, 28x10.5's out back with narrowed rearend, 10pt cage lol....
Mike
The fronts are 27s, I had 26s on it but they didn't fill the wheel well gap that I wanted too and the car sat too low with the 26s. So now I got my gap filled and th car isn't scraping the ground
Rob, I don't think there's too much money to be made, especially at a RSD or SCC. There all gonna think it runs 7s lol.
The rear is narrowed 2.5/side
Everyone else thanks for the compliments!
Rob, I don't think there's too much money to be made, especially at a RSD or SCC. There all gonna think it runs 7s lol.
The rear is narrowed 2.5/side
Everyone else thanks for the compliments!
Mike
just read all 24 pages, I want 2800 lb street (with T Tops, wiper blades, and beat) car too 
Looking great! I cant remember if I said it or not, I like how you cut the middle of the grill out. I may do that on mine but i dont think it will look that sexy without an intercooler there.
Last edited by Black94Z28; Jul 15, 2010 at 08:09 PM.