1360 hp stock head/crank 6.0 lit.
#43
TECH Regular
Thread Starter
Join Date: Aug 2007
Location: Sweden
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
#45
Nice work, I ran high numbers on my supra 700 ,800 hp on stock head then . When I took the head off a said damn that has a small ports.
On the 25 pound by 4000 is good.Did you clip the wheel any....
On the 25 pound by 4000 is good.Did you clip the wheel any....
#47
TECH Regular
Thread Starter
Join Date: Aug 2007
Location: Sweden
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
#52
TECH Regular
Thread Starter
Join Date: Aug 2007
Location: Sweden
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
#60
TECH Senior Member
iTrader: (16)
It just seems at those power levels that a builder would take some extra insurance on a stock crank and at very minum Have it Heat treated, cryo'd, or possibly even hard chromed on the journalls.
I have seen these stock cranks bend around the 600hp mark wich is another reason Why I personally believe some thing may have been done to help it out along the way.
FWIW I am not trying to start something or be a jerk, Thats just my personal opinion...
I have seen these stock cranks bend around the 600hp mark wich is another reason Why I personally believe some thing may have been done to help it out along the way.
FWIW I am not trying to start something or be a jerk, Thats just my personal opinion...