LQ9 6.0L PT88 w/ Truck Manifolds in an FBody Build w/ Pics
#81
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Icon Confused](https://ls1tech.com/forums/images/smilies2/icon_confused.gif)
It was a pleasure meeting you as well. Make a decision and stick to it on the transmission, drive it and if you dont like your choice, change it later. I personally would start with the 4l80 as it would make for a true daily.
#82
TECH Regular
iTrader: (10)
Join Date: Jan 2006
Location: Brooklyn CT
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My next obstacles are the radiator hoses. I think that I will be OK with just using some extension tubes. Should I use PVC, aluminum. stainless or aluminized mild steel?
Oh, and clocking this exhaust housing thing. Gotta get that blaster ****. WD40 isn't making it happen.
Oh, and clocking this exhaust housing thing. Gotta get that blaster ****. WD40 isn't making it happen.
#83
TECH Senior Member
iTrader: (5)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My next obstacles are the radiator hoses. I think that I will be OK with just using some extension tubes. Should I use PVC, aluminum. stainless or aluminized mild steel?
Oh, and clocking this exhaust housing thing. Gotta get that blaster ****. WD40 isn't making it happen.
Oh, and clocking this exhaust housing thing. Gotta get that blaster ****. WD40 isn't making it happen.
PB blaster is better. For my hoses, I used all factory style hoses, just modified. I used the hose extensions you'd find in a procharger kit or something,...and I had a few differnt hoses laying aound with various bends on them for various cars. I frankensteind it, and it came out very smooth. tighten'd them with regular hose clamps...no leaks to date,...
Nothing crazy,.. no need to get fancy atleast for what I did.
#84
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well I went down to see dman yesterday, returned some of the extra couplers and tubing that I didn't need. He gave me a couple of sections of scrap aluminum tubing and showed me a really cool way to make a lip on the end with a pair of ground-down crimpers. I also picked up the couplers and clamps to tie it all together. UPS will be delivering my intake today. I will try to get that on and finalize the cold side tubing as well today.
I picked up a can of PB Blaster today so I will tackle the clocking issue and see if I can break it loose.
I blew off working on it last night but I put in a little time this morning. I picked up a can of PB Blaster and went to work on the exhaust housing. I had to knock it back in order to get it to free up some. Then I was able to clock it to the 12o'clock position on the oil feed and 6 o'clock on the drain. I was about to give up on it about 30 minutes into the process.
I got the coolant extensions in and the oil feed line run. Apparently I didn't use a big enough tap in the pan as the oil drain fitting is 1/2 NPT X -10. I may have used a 3/8 which really really sucks as I will not be dropping the motor again so I will be doing it with the pan on the car.
And last but not least, my intake is back so I will be bolting it on tonite and getting the final measurements so I can get the rest of it welded up.
I picked up a can of PB Blaster today so I will tackle the clocking issue and see if I can break it loose.
I blew off working on it last night but I put in a little time this morning. I picked up a can of PB Blaster and went to work on the exhaust housing. I had to knock it back in order to get it to free up some. Then I was able to clock it to the 12o'clock position on the oil feed and 6 o'clock on the drain. I was about to give up on it about 30 minutes into the process.
I got the coolant extensions in and the oil feed line run. Apparently I didn't use a big enough tap in the pan as the oil drain fitting is 1/2 NPT X -10. I may have used a 3/8 which really really sucks as I will not be dropping the motor again so I will be doing it with the pan on the car.
And last but not least, my intake is back so I will be bolting it on tonite and getting the final measurements so I can get the rest of it welded up.
#92
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So today I ran the oil return and it worked out perfect. I got the wrong fitting for the motor side of the oil feed. I must need a 1/8 npt x -4. I got a -3.
I got the rest of the t-bolt clamps and shortened up the tube on the upper radiator hose for better clearance of the power steering pump pulley.
I took the rest of the cold side tubing to my friend's house to finish up the TIG welding. I decided to keep it as 2 peices, leaving one coupler in between for quick removal. He also welded the BOV tube and a threaded bung for a screw-in type IAT sensor.
![Name: IMG_0217.jpg
Views: 605
Size: 45.8 KB](https://ls1tech.com/forums/attachments/forced-induction/665868d1501791986-lq9-6-0l-pt88-w-truck-manifolds-fbody-build-w-pics-img_0217.jpg)
.
.
.
I got the rest of the t-bolt clamps and shortened up the tube on the upper radiator hose for better clearance of the power steering pump pulley.
I took the rest of the cold side tubing to my friend's house to finish up the TIG welding. I decided to keep it as 2 peices, leaving one coupler in between for quick removal. He also welded the BOV tube and a threaded bung for a screw-in type IAT sensor.
![Name: IMG_0217.jpg
Views: 605
Size: 45.8 KB](https://ls1tech.com/forums/attachments/forced-induction/665868d1501791986-lq9-6-0l-pt88-w-truck-manifolds-fbody-build-w-pics-img_0217.jpg)
.
.
.
![Name: IMG_0216.jpg
Views: 583
Size: 87.6 KB](https://ls1tech.com/forums/attachments/forced-induction/665869d1501791986-lq9-6-0l-pt88-w-truck-manifolds-fbody-build-w-pics-img_0216.jpg)
#97
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
We are bringing the car over to a friends shop to clean up the rats nest of wiring and put the inside of the car back together on Thursday morning. Not sure how long that will take but I will be present as much as possible cracking the whip. No more than another week.
#100
Launching!
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
really nice info on your build. I was starting to gather parts to build a 408 single-turbo motor but the more I see you guys doing 370's I like it even better. Lot's of HP and I really don't HAVE to buy a high dollar crank to do it. A good set of rods and pistons and I can put the rest in to heads and pressure "parts". Thanks for the great read. I wish I lived down "south" instead of here in the Panhandle.......you guys got some sweet stuff down that way!