POWER from a D1
Thread Starter
10 Second Club
iTrader: (13)
Joined: Feb 2006
Posts: 3,297
Likes: 0
From: MOREHEAD KY
POWER from a D1 hay guys i am also most done with my car i was wanting to see how much power you are getting from your D1 set ups? please post:
what size engine you have
what is you compression ratio
what pulley sizes you are running
intercooler you are running
cam size
transmission
gears
boost number
im trying to see what i should hope for here thanks
what size engine you have
what is you compression ratio
what pulley sizes you are running
intercooler you are running
cam size
transmission
gears
boost number
im trying to see what i should hope for here thanks
My past set-ups.
2000 Camaro SS
383 Ls1
D1SC
9.7:1
7.65/3.55 Pulleys
Ebay FMIC 24X12X4
224/228/114 Cam, Stock 01 LS1, 98 LS1, 02 LS6 cams
M6
4.10 gears
16psi max @6800rpms
750rwhp (w/ stock '98 cam & 1.8 rockers) aggressive tune
2001 Camaro SS
346 LS1
D1SC
9:1 Comp
7.65/3.7 pulleys
Ebay FMIC 24X12X4
224/228/114 Cam
M6
4.10 Gears
13-14psi max @6600rpms
620rwhp
Edit: Exhaust - Pacesetter 1-3/4" headers and a TSP catted Y-pipe dumped before the axle.
2000 Camaro SS
383 Ls1
D1SC
9.7:1
7.65/3.55 Pulleys
Ebay FMIC 24X12X4
224/228/114 Cam, Stock 01 LS1, 98 LS1, 02 LS6 cams
M6
4.10 gears
16psi max @6800rpms
750rwhp (w/ stock '98 cam & 1.8 rockers) aggressive tune
2001 Camaro SS
346 LS1
D1SC
9:1 Comp
7.65/3.7 pulleys
Ebay FMIC 24X12X4
224/228/114 Cam
M6
4.10 Gears
13-14psi max @6600rpms
620rwhp
Edit: Exhaust - Pacesetter 1-3/4" headers and a TSP catted Y-pipe dumped before the axle.
Last edited by SilverSS; Jul 1, 2009 at 03:16 PM.
My current setup on the D1-SC.
396ci.
9.62:1
7.65 and 3.4
4.5" ATI Twins
AFR 205's
224/232 .581/.585 115LSA
4L60E with Vig. Triple Disc
3.73's in Moser 12 bolt, 33 spline axles
18-19 PSI
773RWHP 709RWTQ - No dyno tricks, on the street wheels. Dynojet.
396ci.
9.62:1
7.65 and 3.4
4.5" ATI Twins
AFR 205's
224/232 .581/.585 115LSA
4L60E with Vig. Triple Disc
3.73's in Moser 12 bolt, 33 spline axles
18-19 PSI
773RWHP 709RWTQ - No dyno tricks, on the street wheels. Dynojet.
Trending Topics
Thread Starter
10 Second Club
iTrader: (13)
Joined: Feb 2006
Posts: 3,297
Likes: 0
From: MOREHEAD KY
347
9:8:1
6.0 heads (mostly stock except for clean up and milling after first motor popped)
EPP blower cam 232/240 .596/.608 115
EPP FMIC
7.25/3.7 & 3.4 not sure yet
4l80
3500 stall 3:73 in a 8.8
not sure how much boot it will make yet im trying to get it done this week
what do you think it will make?
9:8:1
6.0 heads (mostly stock except for clean up and milling after first motor popped)
EPP blower cam 232/240 .596/.608 115
EPP FMIC
7.25/3.7 & 3.4 not sure yet
4l80
3500 stall 3:73 in a 8.8
not sure how much boot it will make yet im trying to get it done this week
what do you think it will make?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
TECH Fanatic
Joined: Jun 2003
Posts: 1,869
Likes: 99
1998 Camaro Z28
347 H/C LS1 - stock bottom end
224/228/114 Cam
Mototron 60's
RaceTronix P & P
16 degrees timing -max
SD tune
Patriot L/C LQ9 heads
EPP FMIC - custom aluminum piping
D1SC
4.38 Pulley 8 rib
Performa 4LE60
Yank PY3400E
Moser 3.73 gears
8psi max @6200rpms
565 rwhp - Mustang dyno
With a little more timing could probably make 600 but NOT because of stock bottom end.
347 H/C LS1 - stock bottom end
224/228/114 Cam
Mototron 60's
RaceTronix P & P
16 degrees timing -max
SD tune
Patriot L/C LQ9 heads
EPP FMIC - custom aluminum piping
D1SC
4.38 Pulley 8 rib
Performa 4LE60
Yank PY3400E
Moser 3.73 gears
8psi max @6200rpms
565 rwhp - Mustang dyno
With a little more timing could probably make 600 but NOT because of stock bottom end.
Last edited by dlandsvZ28; Jul 4, 2009 at 05:07 PM.
what size engine you have: 347ci forged pistons, stock rods, ls6 heads
what is you compression ratio: 9.48:1
what pulley sizes you are running: 7.65 4.00
intercooler you are running: EPP FMIC
cam size: LS6
transmission: T56
gears:3.42
boost number: 10 or 11
584rwhp 532 rwtq on 93+meth on a safe tune
what is you compression ratio: 9.48:1
what pulley sizes you are running: 7.65 4.00
intercooler you are running: EPP FMIC
cam size: LS6
transmission: T56
gears:3.42
boost number: 10 or 11
584rwhp 532 rwtq on 93+meth on a safe tune
Wow those are some nice numbers. If you don't mine me asking what type of times have you run with this set up?
