LS1 418 F1A Build Thread
#21
On The Tree
iTrader: (21)
Join Date: Oct 2004
Location: Altoona, Iowa
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Oh my god! That was my baby, I thought I had made that car badass but you really did it. Nice job! Definately put an auto in it, I wish I would have. Put some mickey thompson drag wheels on it too with slicks. Are you still running 4.30's in it or going with a higher gear?
#22
9 Second Club
iTrader: (104)
Nice combo of parts, love to see what it runs at the track. Get an auto in there and depending on weight I would guess easy 9.50's, maybe lower if it is light and hooks.
I like the blacked out FAST and KAtech covers.
How are your temps with A/C? What about IATs on the street, I didn't see where you said you had a meth kit or not? What kind of fuel are you burning?
I like the blacked out FAST and KAtech covers.
How are your temps with A/C? What about IATs on the street, I didn't see where you said you had a meth kit or not? What kind of fuel are you burning?
#23
TECH Resident
iTrader: (23)
Join Date: Oct 2008
Location: Rhode Island
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
i thought it would of been a bit more? not doggin it by no means but i would of expected 900+. that is the exact same build i want to do (with a va speed 418 FI block) but with a lower compression for more boost. is there more psi left?
#24
Launching!
Thread Starter
iTrader: (12)
Join Date: Apr 2009
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Oh my god! That was my baby, I thought I had made that car badass but you really did it. Nice job! Definately put an auto in it, I wish I would have. Put some mickey thompson drag wheels on it too with slicks. Are you still running 4.30's in it or going with a higher gear?
Still has the 4.30 for now I'm trying to get some 3.55 in it ASAP.
Sadly this car since you were the owner became a DD for at least one guy. The underside of the car looks like *** from bottoming out and rain I'm sure you can imagine. I'm working on it though!
Nice combo of parts, love to see what it runs at the track. Get an auto in there and depending on weight I would guess easy 9.50's, maybe lower if it is light and hooks.
I like the blacked out FAST and KAtech covers.
How are your temps with A/C? What about IATs on the street, I didn't see where you said you had a meth kit or not? What kind of fuel are you burning?
Last edited by laughatrice; 09-12-2009 at 03:29 PM.
#25
Launching!
Thread Starter
iTrader: (12)
Join Date: Apr 2009
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
I can probably get more boost out of this blower it's 4" pulley now. It's going to be hard to control belt slip though. Meth too.
#27
On The Tree
iTrader: (21)
Join Date: Oct 2004
Location: Altoona, Iowa
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I had the valve covers powdercoated and the intake painted by a friend. They were so dirty looking when I got the car I couldn't stand it. Thats to bad you are having to do so much cleaning. I spent so much time cleaning the bottom side of that car. I wish you good luck with it and hope you enjoy it! By the way, that is a bolt in cage that was welded in by the previous owner ( welds look like my 5 year old did it ). At least its black now instead of an orange cage with the tan interior it used to have
#30
TECH Apprentice
iTrader: (24)
Join Date: Nov 2002
Location: spring, TX
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
The inlet hat now that was the biggest problem of this whole build. The one pictured did not work race valve was in the way (others have figured it out I couldn't neither could the techs). A local race fabricator came up with a real nice piece cost me an arm and a leg though. I will have more pics this week when it gets off the dyno.
Finally got the car home the other night, and then the power steering pump **** the bed...
#32
On The Tree
iTrader: (4)
Join Date: Jun 2006
Location: Texas / 427ci F1R 1,002 rwhp/928 rwtq
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
http://www.dallasperformance.com/DPC...lter/index.htm
#34
#35
LS1Tech Sponsor
iTrader: (12)
You should call Dallas Performance. They have a "Big Mouth" ProCharger inlet they designed for my car. There was a 11% loss (90rwhp / 57rwtq) restriction on from the stock inlet compared to running open. Their kit drops the restriction to 3.5%.
http://www.dallasperformance.com/DPC...lter/index.htm
http://www.dallasperformance.com/DPC...lter/index.htm
#36
Launching!
Thread Starter
iTrader: (12)
Join Date: Apr 2009
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
I plan on doing a pull with no inlet although with any luck I will get good results w/ inlet. I agree with you guys though the inlet I was using that was custom brought the rwhp from 810 to 660 crazy! Anyway that inlet is gone and this new one is making good boost no dyno numbers though.
I just got my t56 on the ground. Got my TH400 and the converter ready to go waiting on the all the other crap for the install and should have that thing in this week.
Found something interesting when I was pulling the flywheel. On the back of the intake manifold the vaccum line for a/c or whatever was completely off. Unless it happened to come off while I was removing the tranny it most likely has been off for all my WOT runs probably got boosted off. It's a SD tune so mainly this should be affecting my max boost I assume. This answers a lot of questions I'm running a 4" pulley on an F1A and only making 16lbs we'll see what happens once I plug it up. Should have been making 16lbs on a 4.25" only made 14lbs with that.
I just got my t56 on the ground. Got my TH400 and the converter ready to go waiting on the all the other crap for the install and should have that thing in this week.
Found something interesting when I was pulling the flywheel. On the back of the intake manifold the vaccum line for a/c or whatever was completely off. Unless it happened to come off while I was removing the tranny it most likely has been off for all my WOT runs probably got boosted off. It's a SD tune so mainly this should be affecting my max boost I assume. This answers a lot of questions I'm running a 4" pulley on an F1A and only making 16lbs we'll see what happens once I plug it up. Should have been making 16lbs on a 4.25" only made 14lbs with that.
#39
LS1Tech Co-Founder
iTrader: (34)
93 pump that's very cool.... meth?
You'll want to swap out those 4.30's for 3.50 - 3.73's if you hit the track.
I did 680rwhp TH400 YSi 18 psi 9.40@143 back in 2005... Just as a comparo.
You'll want to swap out those 4.30's for 3.50 - 3.73's if you hit the track.
I did 680rwhp TH400 YSi 18 psi 9.40@143 back in 2005... Just as a comparo.
#40
Launching!
Thread Starter
iTrader: (12)
Join Date: Apr 2009
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
No meth yet probably in the future though.
I actually just pulled my 9" apart and I'm having a shop do the gears tomorrow probably going with a 3.50.
Hell if I run mid 9's first time at the 1/4 I'd be plenty happy at least the first time. Who knows when I'll get in on the 1/4 though definately and 1/8 slip pretty soon. My weight is still at least 3300lb's and with the cage I don't see it getting any lighter I'm starting reduction though.
I actually just pulled my 9" apart and I'm having a shop do the gears tomorrow probably going with a 3.50.
Hell if I run mid 9's first time at the 1/4 I'd be plenty happy at least the first time. Who knows when I'll get in on the 1/4 though definately and 1/8 slip pretty soon. My weight is still at least 3300lb's and with the cage I don't see it getting any lighter I'm starting reduction though.