Enough with the 6 speed
#41
9 Second Club
Thread Starter
iTrader: (27)
Join Date: Apr 2003
Location: HOUSTON-TX
Posts: 3,685
Likes: 0
Received 0 Likes
on
0 Posts
I will fix and keep the t56 though, I have another car that is more mild that I will install it in.
#43
I thought I remembered Harlan (y2khawk) posting about his T56 case actually flexing back in the day. I know he posted in depth on the issue but it must have been on LS1.com because it took me forever to find this tidbit on here.
https://ls1tech.com/forums/1151871-post116.html
Something to think about if nothing else,
Larry
https://ls1tech.com/forums/1151871-post116.html
Something to think about if nothing else,
Larry
#44
TECH Enthusiast
iTrader: (1)
I love both Stalled autos, and manuals, and i have owned both. I have to say for ease of Launching and drivability, Get a stalled 80E and call it a day. My turbo car (85 Monte SS with a 5.3 and turbo) will definitely be an auto with a stall when its finished. whereas, the firehawk will stay a 6 speed, even with a new NA motor in it. If nothing else, give the auto a go and swap back if you dont like it
#46
TECH Resident
iTrader: (6)
Join Date: May 2007
Location: WACO, TX
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
4l80e is the best option for you! not sure how long the th350 would hold at 1000+hp. your car is way to heavy (imho) for a glide! th400 would be awesome but dont have OD! so if you got the cash and dont mind extra weight the 80e is the ONLY option! if not the 80e the th400 would be the next logical decision!
#48
10 Second Club
iTrader: (1)
Join Date: Sep 2004
Location: Fairview NC (near Charlotte)
Posts: 717
Received 0 Likes
on
0 Posts
i had a 6 speed and now have a 4L80E Do it and dont look back, if you look around you can do it pretty cheap, I traded my built 6 speed and all swap parts to another user on here for all the swap parts for the 80E + the transmission, It is supposed to be a Rostler but I never checked, I just ran it and it has held up great for 10,000+ miles and 30+ dragstrip passes, now I am not making near the power you but I aim to change that soon.
#49
TECH Fanatic
iTrader: (6)
Join Date: Dec 2001
Location: LV NV
Posts: 1,114
Likes: 0
Received 0 Likes
on
0 Posts
Because of cost, I dont ussually go the 480e route. Zombiess runs 2.75 gears and a 28 tire with a rossler 400. While I wouldnt drive it cross country unless I had too, I ve driven it 50 miles on the hiway. In one of my cars I have 3.25's but a 315/60....and th400.
In the turbo van I did a rossler 4l80e.....and its perfect. While its not a 1000 hp...it probably is 600 at 6600 lbs or more most of the time, and IS a 100% daily driver , family wagon, and cross country cruiser.
You have the power to gear it higher....Id go 2.73's or so....and a th400. I run 2.73s in my wifes 98 turbo ss and its nice enough for her to drive to work on the freeway in the fast lane with a short tire.
In the turbo van I did a rossler 4l80e.....and its perfect. While its not a 1000 hp...it probably is 600 at 6600 lbs or more most of the time, and IS a 100% daily driver , family wagon, and cross country cruiser.
You have the power to gear it higher....Id go 2.73's or so....and a th400. I run 2.73s in my wifes 98 turbo ss and its nice enough for her to drive to work on the freeway in the fast lane with a short tire.
#50
9 Second Club
Thread Starter
iTrader: (27)
Join Date: Apr 2003
Location: HOUSTON-TX
Posts: 3,685
Likes: 0
Received 0 Likes
on
0 Posts
Im leaning towards a TH400 with the GVO on it
I pulled the trans out today, the input shaft feels like there is nothing attached to it, it spins freely lol. I guess I'll get LMR to quote fixing this **** so I can use it on my 94.
I pulled the trans out today, the input shaft feels like there is nothing attached to it, it spins freely lol. I guess I'll get LMR to quote fixing this **** so I can use it on my 94.
#51
10 Second Club
iTrader: (10)
Join Date: Jun 2005
Location: cape cod mass
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
time for a transzilla.. or th4oo or 4L80e
i have a 2.72 gear with a th400 and a 325/50/15 mt dr shifts outs of 1st @ 6500 about 81mph and 130mph out of 2 its kinda like a power glide.. with a od i did this set up cause it was free... I am building my 4l80e now
i have a 2.72 gear with a th400 and a 325/50/15 mt dr shifts outs of 1st @ 6500 about 81mph and 130mph out of 2 its kinda like a power glide.. with a od i did this set up cause it was free... I am building my 4l80e now
#54
12 Second Club
iTrader: (4)
Join Date: Aug 2003
Location: NorCal
Posts: 1,618
Likes: 0
Received 0 Likes
on
0 Posts
I wonder if there is something flexed/twisted with your case..... causing something to have tolerance issues.
I beat the crap out of my stock internal t56 with 650rwhp..... launched it at 5500rpm lifting the tires, 1.6 60', 3800+lbs, and it ate it all.
The hydraulics on the other hand..... the hydraulics didnt like launching like that... 2nd gear took forever to engage... resulting in only a low 11 at 128mph.
Im about 2hrs away from finishing my 4L80E swap.... cant wait. I suggest a FLT 4L80E or a Rosler TH400.
I beat the crap out of my stock internal t56 with 650rwhp..... launched it at 5500rpm lifting the tires, 1.6 60', 3800+lbs, and it ate it all.
The hydraulics on the other hand..... the hydraulics didnt like launching like that... 2nd gear took forever to engage... resulting in only a low 11 at 128mph.
Im about 2hrs away from finishing my 4L80E swap.... cant wait. I suggest a FLT 4L80E or a Rosler TH400.
#58