Fireball Outlaw Drag Radial Rebuild Thread
02-19-2011, 09:19 AM
#1001
Used parts will get ya a LONG way, as long as you get them from a trusted source.
I've found TOO many deals on good used stuff over the years... that's how my car was built the first time, chances are it will be alot of the same this time around... just a matter of having the $ handy when the deals are found.
Looks good Brian, should be done by what, next weekend?
I've found TOO many deals on good used stuff over the years... that's how my car was built the first time, chances are it will be alot of the same this time around... just a matter of having the $ handy when the deals are found.
Looks good Brian, should be done by what, next weekend?
02-19-2011, 05:44 PM
#1003
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
Saturday evening update:
Got alot of small things done....Plumbing takes an eternity
Will most likely get cracking on aluminum stuff tomorrow....
Got alot of small things done....Plumbing takes an eternity
Will most likely get cracking on aluminum stuff tomorrow.... 
02-20-2011, 05:31 AM
#1007
11 Second Club
iTrader: (11)
Join Date: Dec 2008
Location: San Diego/ from the 316
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
your lucky you only leave for a week and a half
i have been away from my car for 6 months.. and it needs lot of work before it is done..
its also my driver.. (good thing i got a buddy selling me his 95 talon TSi)
i have been away from my car for 6 months.. and it needs lot of work before it is done..
its also my driver.. (good thing i got a buddy selling me his 95 talon TSi)
Last edited by yelo04goat; 02-20-2011 at 05:39 AM.
02-20-2011, 07:23 PM
#1012
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
sunday night update...
fought alot of big issues today which limited progress....
had to redo some of the front tubular structure by the turbo to gain more clearance...it wouldn't rotate enough to let the first section of cold side piping clear the front end
Headers are wrapped and final installed.
fuel system is DONE
fought alot of big issues today which limited progress....
had to redo some of the front tubular structure by the turbo to gain more clearance...it wouldn't rotate enough to let the first section of cold side piping clear the front end
Headers are wrapped and final installed.
fuel system is DONE
