Ninetres 10.5 Twins Build
#1
Ninetres 10.5 Twins Build
Oh yes. The time has finally come to start the thread. I race in the West Coast Hot Rod Association Limited 10.5 class (www.NOT-A-SPONSOR.com.org.gov.net). This will be my second year and first complete season. Last year I made a couple races to get my toes wet in actual competitive events and I am ready to win this year lol. I could not have even though about this years upgrades with out picking up a couple GREAT sponsors: Jose @ forcedinductions.com, Eugene @ Gene's Performance, Nate @ All Out Performance and Rick @ Synergy Motorsports. If any of you guys need turbo products definitly call Jose tell him I said he will give you a huge discount :p Here are the cliff noted plans, pics to follow!!!!
The Bulllet (nothing new)
370ci 9.1:1 LQ9 by All Out Performance
Weisco pistons
callies rods
stock crank
coated race bearings
24x/23x 6xx/6xx 114 cam
AFR22 heads
yella terra rockers
victor jr intake (okay this is new this year!)
Custom Gene's Performace Turbo kit
Twin custom 60mm turbonetics units
(2) 45mm Turbosmart WGs
JGS 60mm BOV
custom SS tubular manifolds
3.5" SS downpipes
3.5" Aluminum exhausts back to axle
Custom 2000hp A2W intercooler mounted in cab
Custom 8 gallon water tank
Turbosmart manual boost controller
All hot parts wrapped
Fuel
Custom sumped 9 gallon tank in stock location
dual bosch 044s
dual dedicated -8 feeds
-8 drain
Fuel lab FPR
Fuel lab filters
edelbrock rails
160lb injectors
Drivetrain
Rossler Terminator 3 Powerglide
Art Carr 3600 converter
Aluminum shaft
3.25 gear in spooled 9"
STOCK PCM
Synergy 2-step
Pics will be updated frequently. Please post up any questions and I welcome ALL feedback! Thanks!
.
.
.
*PLEASE DO NOT POST NON-SPONSOR CONTACT INFO!
.
.
.
The Bulllet (nothing new)
370ci 9.1:1 LQ9 by All Out Performance
Weisco pistons
callies rods
stock crank
coated race bearings
24x/23x 6xx/6xx 114 cam
AFR22 heads
yella terra rockers
victor jr intake (okay this is new this year!)
Custom Gene's Performace Turbo kit
Twin custom 60mm turbonetics units
(2) 45mm Turbosmart WGs
JGS 60mm BOV
custom SS tubular manifolds
3.5" SS downpipes
3.5" Aluminum exhausts back to axle
Custom 2000hp A2W intercooler mounted in cab
Custom 8 gallon water tank
Turbosmart manual boost controller
All hot parts wrapped
Fuel
Custom sumped 9 gallon tank in stock location
dual bosch 044s
dual dedicated -8 feeds
-8 drain
Fuel lab FPR
Fuel lab filters
edelbrock rails
160lb injectors
Drivetrain
Rossler Terminator 3 Powerglide
Art Carr 3600 converter
Aluminum shaft
3.25 gear in spooled 9"
STOCK PCM
Synergy 2-step
Pics will be updated frequently. Please post up any questions and I welcome ALL feedback! Thanks!
.
.
.
*PLEASE DO NOT POST NON-SPONSOR CONTACT INFO!
.
.
.
Last edited by CRAGER; 01-22-2010 at 02:15 AM.
#2
i guess i might as well introduce myself here
Name is Eugene and im building this badass turbo setup for Sean. we're both extremely excited about this build, its going to rock!
Few pics of the car as it sits.
Just ordered up the materials for hot side piping and in the mean time i got cracking on the Custom Fuel cell thats ~9.5 gal capacity.
The sump will have 2 -10 fittings to feed 2 Bosch 044 pumps.
Tomorrow i'll get started on the Water tank for the A/W IC setup.
Name is Eugene and im building this badass turbo setup for Sean. we're both extremely excited about this build, its going to rock!
Few pics of the car as it sits.
Just ordered up the materials for hot side piping and in the mean time i got cracking on the Custom Fuel cell thats ~9.5 gal capacity.
The sump will have 2 -10 fittings to feed 2 Bosch 044 pumps.
Tomorrow i'll get started on the Water tank for the A/W IC setup.
Trending Topics
#20
BTW: if you do want to test a vessel to 100psi, make sure it is pressurised with water and not air. Otherwise, kiss your family goodbye before you do it...