2010 base 4.8 truck 2wd mpt76q trim build
#125
TECH Fanatic
iTrader: (4)
Join Date: Dec 2009
Location: Charleston, SC
Posts: 1,497
Likes: 0
Received 0 Likes
on
0 Posts
John i'm running the 02' LS6 cam.
Denmah once you run out of fuel, a 1 to 1 regulator will help keep those 80's on par. The boost pressure puts pressure on the face on your injectors, limiting their output. Thats what the regulator takes care of.
Good luck man and keep it rocking.
Denmah once you run out of fuel, a 1 to 1 regulator will help keep those 80's on par. The boost pressure puts pressure on the face on your injectors, limiting their output. Thats what the regulator takes care of.
Good luck man and keep it rocking.
#126
Teching In
Join Date: Sep 2005
Location: Lehigh Valley, PA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I think the highest we've seen on the injectors is like 14 msec at 15 psi.
#128
lethal performance tall cobra 80lb siemens dekas, dropped in, spaced the rail higher with plastic spacers.
idle great
here is some screwing around
http://www.youtube.com/watch?v=uYyBrsGMNUQ
idle great
here is some screwing around
http://www.youtube.com/watch?v=uYyBrsGMNUQ
#134
TECH Resident
iTrader: (17)
Join Date: Sep 2009
Location: Orlando Fl.
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
Doubtful them chevys sit low in the front to begin with anyways!
And everytime i see this thread it makes me wanna build truck!
And everytime i see this thread it makes me wanna build truck!
Last edited by BottleFedZ346; 09-19-2010 at 11:46 PM.