I found the part. But it looks like the spring needs to be flipped around how do you go about doing that. Its the part number I found listed on here from auto zone.

 

Bump no one has done this?

 

If I could find good pics of it, and had a source for the parts, i would attempt it myself.

 

We really do need a how-to thread showing how to create one of these.

 

I just need a replacement tensioner the bracket would be very easy to make though.

 

Whats the part# and where did you find it? Who makes it?

 

ya more info on this would be great.

 

http://www.autozone.com/autozone/par...er=136377_0_0_

 

do you have any good pics of the SDCE setup ?

 

http://i17.photobucket.com/albums/b65/Badge01/SDCE2.jpg
http://i17.photobucket.com/albums/b65/Badge01/SDCE1.jpg

 

I thought that SDCE modifies your stock J bracket ?

Also, take into consideration that the SDCE crank pulley is their own design and dimension. I am pretty sure that the Procharger 8 rib pulley is a larger diameter (wgich is what I have).

 

Anyone who enters this thread, please make a contribution of any SDCE pics you may have or no the location of.

 

That defineitly is the same tensioner. $50 ain't bad either.

 

Subscribing

 

Figured I would bump this up.

 

anyone know the dia. of the idler???

 

did someone give up on this?

 

I would like to try building my own setup instead of paying $$$$

 

Bump so the tensioner that is shown on the link actually tensions the oppisite way of the sdce has anyone used that part and if so how?

 

I'm very surprised at the lack of attention in this thread. Seems like a great DIY project for someone with the time to research it firsthand.