AES 390ci - Now with Callies Dragonslayer crankshaft
#381
I have Qty 1 390ci shortblocks left (assembled)
Diamond pistons -15cc
NPR ring set, steel top ring, Napier 2nd ring
Compstar H beam connecting rods (ARP 2000 bolts)
Compstar LSc 3.825" crankshaft balanced
King XP bearings
Durabond cam bearings
ARP main studs
6.0 iron block, machined, decked, tq plate honed etc.
SOLD
Diamond pistons -15cc
NPR ring set, steel top ring, Napier 2nd ring
Compstar H beam connecting rods (ARP 2000 bolts)
Compstar LSc 3.825" crankshaft balanced
King XP bearings
Durabond cam bearings
ARP main studs
6.0 iron block, machined, decked, tq plate honed etc.
SOLD
Last edited by AES Racing; 05-11-2012 at 04:52 PM.
#392
btw, we have confirmed 3.825" crankshafts are in production, we will begin offering this combination again,
also a 4340 crankshaft option will be coming soon too. At nearly 50,000 views maybe time to retire this thread, start a new one this summer.
Fraser
also a 4340 crankshaft option will be coming soon too. At nearly 50,000 views maybe time to retire this thread, start a new one this summer.
Fraser
#393
TECH Addict
iTrader: (16)
I went with the TSP 237cc heads. Gives me room to grow and great for this application, and slightly cheaper than AFR and TFS and you still get a super thick deck. They cleaned em up real nice. Fraser and Mike Have them now and were kind enough to take some pics for us. The main reason I chose them, is I have not seen them on a ton of combos.
I also sent you a PM about that 3.4 pulley.
Last edited by I8UR4RD; 06-06-2012 at 10:25 PM.
#395
12 Second Club
iTrader: (12)
Join Date: Jul 2007
Location: NH
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
I'm interested in the AES 390 as well. I have a set of milled TFS 215 heads milled to 60cc, will these work well on the AES 390? would I be able to hit around 10:1 compression or should I just sell them and try a different head?
I want to run a thick deck head but don't want to go too crazy with the $$ on heads.
I want to run a thick deck head but don't want to go too crazy with the $$ on heads.
#396
10 Second Club
iTrader: (64)
I'm interested in the AES 390 as well. I have a set of milled TFS 215 heads milled to 60cc, will these work well on the AES 390? would I be able to hit around 10:1 compression or should I just sell them and try a different head?
I want to run a thick deck head but don't want to go too crazy with the $$ on heads.
I want to run a thick deck head but don't want to go too crazy with the $$ on heads.