BadgeZ28

iTrader: (28)

Here is a picture of the new custom made 6 rib crank pulley I received from Innovators West. You will recognize the stock pulley beside it. I imagine they still have the cad file for anyone wanting to step up the boost.

http://i17.photobucket.com/albums/b65/Badge01/6rib2.jpg

Bob@BruteSpeed

iTrader: (16)

That crank pulley looks great! Years ago I had an MMS crank pulley for my 6 rib D-1SC, and with a 4.00 pulley on the head unit it made 15 psi of boost. This was with a stock engine with headers and exhaust at 125,000 miles. It lasted longer than we expected it too. Bob

Packy

iTrader: (11)

I recognize that old stock one. LOL! The new one looks good!

mattster03

iTrader: (22)

Do you have a contact for the designer? How much did it cost?

youngrigo

+1...

BadgeZ28

iTrader: (28)

You mentioned the MMS pulley a while back and I couldn't locate one. I had the blower pulley coated by carbonite, so will see if there is any slipping. I am amazed your motor held up under that amount of boost.

BadgeZ28

iTrader: (28)

My contact there was Chris Rose. I paid $225, but I am guessing it might be cheaper if they saved the production file.
Innovators West / Waddle's Manufacturing / IWR,LLC.

2816 Centennial Rd.

Salina, KS 67401

785-825-6166

785-825-2973 Fax

www.innovatorswest.com

WHPLASH

iTrader: (22)

I have the MMS 7.875" crank pulley and a 3.85" blower pulley. Its putting out 11 lbs with my setup. A 3.70" and she slips.

I'll be selling it soon, as I just sent in my J-bracket to SDCE.

Nice crank pulley though.