What heads are good for a 390ci turbo motor
#1
What heads are good for a 390ci turbo motor
AES racing 390ci short block
Fast 102/102
91mm turbo
Epp blower cam
What heads should I get for my short block? I need something cheap $1400 bucks or cheaper....so I was looking at some Patriot heads (part number 2019)
specs on these heads are:
Combustion Chamber: 72cc
Intake Runner: 227cc
Exhaust Runner: 70cc
Intake Valve: 2.08"
Exhaust Valve: 1.60"
Max. Valve Spring Lift: 0.650"
Spring Pressure Closed: 135 lbs. @ 1.800"
Spring Pressure Open: 375 lbs. @ 1.090"
Retainer Material: Titanium
Valve Seal Material: Viton
Valve Guide Material: Manganese Bronze
Valve Job: 5-angle
Will these heads work good with my setup? Any info will be greatly appreciated...thanks
Fast 102/102
91mm turbo
Epp blower cam
What heads should I get for my short block? I need something cheap $1400 bucks or cheaper....so I was looking at some Patriot heads (part number 2019)
specs on these heads are:
Combustion Chamber: 72cc
Intake Runner: 227cc
Exhaust Runner: 70cc
Intake Valve: 2.08"
Exhaust Valve: 1.60"
Max. Valve Spring Lift: 0.650"
Spring Pressure Closed: 135 lbs. @ 1.800"
Spring Pressure Open: 375 lbs. @ 1.090"
Retainer Material: Titanium
Valve Seal Material: Viton
Valve Guide Material: Manganese Bronze
Valve Job: 5-angle
Will these heads work good with my setup? Any info will be greatly appreciated...thanks
#5
There are proven ways around the heads sealing other than 6 bolt blocks. Just gotta pay to have the work done.
Trending Topics
#11
Well I got the Fast 102 and 102 throttle body for $600 so Id like to save some on the heads...lol but I understand where everyone is coming from, but this isnt junk thats getting thrown together but at the same time I dont make a **** ton of money either...
#13
7 Second Club
iTrader: (11)
AES racing 390ci short block
Fast 102/102
91mm turbo
Epp blower cam
What heads should I get for my short block? I need something cheap $1400 bucks or cheaper....so I was looking at some Patriot heads (part number 2019)
specs on these heads are:
Combustion Chamber: 72cc
Intake Runner: 227cc
Exhaust Runner: 70cc
Intake Valve: 2.08"
Exhaust Valve: 1.60"
Max. Valve Spring Lift: 0.650"
Spring Pressure Closed: 135 lbs. @ 1.800"
Spring Pressure Open: 375 lbs. @ 1.090"
Retainer Material: Titanium
Valve Seal Material: Viton
Valve Guide Material: Manganese Bronze
Valve Job: 5-angle
Will these heads work good with my setup? Any info will be greatly appreciated...thanks
Fast 102/102
91mm turbo
Epp blower cam
What heads should I get for my short block? I need something cheap $1400 bucks or cheaper....so I was looking at some Patriot heads (part number 2019)
specs on these heads are:
Combustion Chamber: 72cc
Intake Runner: 227cc
Exhaust Runner: 70cc
Intake Valve: 2.08"
Exhaust Valve: 1.60"
Max. Valve Spring Lift: 0.650"
Spring Pressure Closed: 135 lbs. @ 1.800"
Spring Pressure Open: 375 lbs. @ 1.090"
Retainer Material: Titanium
Valve Seal Material: Viton
Valve Guide Material: Manganese Bronze
Valve Job: 5-angle
Will these heads work good with my setup? Any info will be greatly appreciated...thanks
#20
TECH Regular
iTrader: (4)
Join Date: Mar 2009
Location: ATX
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
i would just get some l92's and have them ported. stock castings work fine for people i know in my area. dudeman ran 18+ lbs of boost.. possibly 20+lbs.. not exactly sure, but i know he has gone over 18-19 on STOCK 317 heads, with ls3 gasket an EBAY head studs and isnt pushing any water