twinturbo2

iTrader: (16)

where do u pickup oil pressure to feed your turbos is the sending unit the best easiest place thanks

funky_monkey58

Who uses oil anymore? http://www.compturbo.com/spotlights/oil_less.php

twinturbo2

iTrader: (16)

I do that's why I asked

funky_monkey58

Either that or a sandwich plate.

Adam86

iTrader: (10)

I believe right above the drain plug there is a pressurized spot.

tripblackls1

iTrader: (11)

see the bronze thing above the oilfilter

Texas_WS6

iTrader: (9)

I run a Moroso pan with a remote oil filter. I pick oil up after it has been filtered and and after the oil cooler. You can get it from the place in the pick but I have no idea if it is pre or post filtered. If it is pre, then it would not be a bad idea to put a small oil filter inline with it before the turbo.

SirNemesis

twinturbo2

iTrader: (16)

Thanks guys

droksformula

iTrader: (18)

Kurt Urban makes a nice fitting that plugs into the port of the stock oil pressure sending right behind the intake. Fitting has 3x -4 an ports and 1 for your stock oil pressure sensor (optional).