best gears for a turbo m6?
#21
9 Second Club
#22
Nah, it's fine. I could see if it was a powerglide, then 1st would be stupid tall. But even with the th400s 2.48 1st, it works out ok, remember, 26 inch tires here.
#23
9 Second Club
#24
Agreed, was just using the 1st gear as an example. When the car was still t56, with the 2:73 and short tire, the final ratio allowed the car to pull decently in 1st. Probably wasn't optimal, but at the same time, wasn't exactly terrible.
#27
after almost 20 years and same z28 and several junkyard 10 bolts with almost every gear ratio they had available 3.20 to 4.10 i dont think i really noticed much differance other then how i launch and like to shift like maybe by a few hundred rpm. im about to install a tranny outta gto with the 2.97 first idk if ill love it or hate it but probably adjust to it regardless
#28
TECH Addict
iTrader: (9)
Ditch that 4.11 and go with something taller.
Fixed it slightly.... I made the swap from 3.55 to 3.73 and love it. 700rw, 3000lbs raceweight. Car dropped about .12 seconds off the 60' with just the gear change and also does much better on the street when dig racing. I very rarely roll race but I can still drag 4th out to 160 or so.
Fixed it slightly.... I made the swap from 3.55 to 3.73 and love it. 700rw, 3000lbs raceweight. Car dropped about .12 seconds off the 60' with just the gear change and also does much better on the street when dig racing. I very rarely roll race but I can still drag 4th out to 160 or so.