95 TA rear mount build thread
06-21-2011, 04:23 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Mar 2011
Location: Salisbury MD
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
95 TA rear mount build thread im doing my actual turbo build next tuedsday but for this week i am just doing the little things like guages and fuel pump and all...
my build list is (if i can remember)-- sts copy rear mount kit with a t72, 38mm bov running on 5lbs that i will run to 8# from a manual boost controller. the intercooler is a 31x12x3 with a cx racing 2.5in universal piping kit. the fuel system is a 255wilpro with a hotwire kit and 60# injectors. the little stuff is my abs kit which all i did was buy some lines and a proportioning valve. and i got a few gauges which i prob will install tomorrow.
yesterday i started the first part of my build which was the abs delete.
i got a pic of the finished product ill see i can post it..
the reason the engine bay is so dirty is cause it was just in a body shop and i dont wanna clean it cause im gonna be in there all week messing it up anyway
(i dont know how to post pics so its actually in the post.. maybe some1 can tell me how?)
on a side note im doing the whole build for a little over 2k and thats with all the parts already bought. so for everyone who said i could not do it for that
my build list is (if i can remember)-- sts copy rear mount kit with a t72, 38mm bov running on 5lbs that i will run to 8# from a manual boost controller. the intercooler is a 31x12x3 with a cx racing 2.5in universal piping kit. the fuel system is a 255wilpro with a hotwire kit and 60# injectors. the little stuff is my abs kit which all i did was buy some lines and a proportioning valve. and i got a few gauges which i prob will install tomorrow.
yesterday i started the first part of my build which was the abs delete.
i got a pic of the finished product ill see i can post it..
the reason the engine bay is so dirty is cause it was just in a body shop and i dont wanna clean it cause im gonna be in there all week messing it up anyway
(i dont know how to post pics so its actually in the post.. maybe some1 can tell me how?)
on a side note im doing the whole build for a little over 2k and thats with all the parts already bought. so for everyone who said i could not do it for that
06-24-2011, 02:51 PM
#7
Launching!
iTrader: (13)
Join Date: Aug 2008
Location: flint,mi
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
So you have a tc72 and you will be running about 8lbs..And if you have all the supporting mods like upgraded pushrods&springs, fuel pump and a tune.You should be getting ATLEAST a 100ponys. maybe i missed something here?
Trending Topics
06-24-2011, 04:34 PM
#8
Teching In
Join Date: Mar 2010
Location: Thurmont MD, 21788
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
he's lookin to be around 430+ at the wheels.
06-25-2011, 05:58 PM
#10
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Mar 2011
Location: Salisbury MD
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man. I was gonna do the t 70 but I will prob blow my engine so I'm just going bigger so I don't need to buy another turbo once it blows lol how much boost you running
06-26-2011, 03:25 AM
#11
TECH Addict
iTrader: (2)
Im actually planning to move to a T76 with .84 AR later. Im just starting with this "little guy" for now. Its a cheapy so im not worried about it if i have to buy another. Just easing my way into turbocharging my car.
IM only planning on 8 max PSI to start. with pressure drop form tubing and intercooler i might see 6-7ish but that will be fine, with 5psi i should get roughly 450 HP. PLenty for me to start with, then ill fine tune it for 500 later.
06-26-2011, 10:43 AM
#12
Teching In
Join Date: Mar 2010
Location: Thurmont MD, 21788
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Especially with my new RR-Kmember
06-26-2011, 07:37 PM
#14
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Mar 2011
Location: Salisbury MD
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
ha ha what ever shayne.. if i remember correctly your going with an IRON block just like me.... 
and yea its not that i dont like ls its just that built lt's are hard hard hard to find so im wanting to do something a little different...
and yea its not that i dont like ls its just that built lt's are hard hard hard to find so im wanting to do something a little different...
