Bob@BruteSpeed

iTrader: (16)

August 22 - Price Increase
Finishing touches are being applied to the new application and price guide, which will be effective August 22. Due to continuing increases in raw material costs, especially metal, this new application and price guide contains price increases for most of the product line.

If you have been thinking of going with a ProCharger System, now is the time to do so. I offer all the systems ProCharger produces at the link here, along with kits that I have put together myself. http://shop.brutespeed.com/ATI-ProCh...-Arrows_c2.htm

Let me know if you have any questions. Bob

TermnEatr

iTrader: (24)

Is this gonna affect other individual things I'm gonna be ordering the new front mount intercooler kit just curious if that's gonna go up to

Bob@BruteSpeed

iTrader: (16)

I don't know for sure, but with the rising cost of steel it may affect all the piece parts too. Bob

TermnEatr

iTrader: (24)

Ok thanks bob

Bob@BruteSpeed

iTrader: (16)

Bump for Friday the 5th. Bob

Bob@BruteSpeed

iTrader: (16)

Not too many days left, get your orders in! Bob

allout06

iTrader: (11)

guess ill have to spend more moeny... You ever do like a combo deal on parts? Say i ordered basically everything for the setup minus the intercooler, fuel pump/injectors, and headunit. basically the bracketry, pullies, fan setup, BOV (race), belt ect...

Black98s10

Do you know how much more the kits will be? Won't be buying mine til the end of winter.

Bob@BruteSpeed

iTrader: (16)

No I don't, not yet. The new price guides have not shown up yet. Bob

Bob@BruteSpeed

iTrader: (16)

If you piece together an entire system it will cost you more money than if you buy the whole system. The reason is that ProCharger charges more for a piece part than what that parts percentage from an entire kit cost. Does that make sence, it is early. I do have almost all the piece parts listed on my website, should you find a great deal on some used parts. Bob

El_Diablo

iTrader: (9)

Morning Bob. Can you PM me a price on a polished F2 for a C5/C6 application? (going in my camaro with a vette cog system)

allout06

iTrader: (11)

Heres the list i have saved on my computer Bob, tell me what you think.

Parts/prices from your website.

8-Rib Crank pully - $175
8-Rib Blower Pulley - $85
ATI Harmonic Balancer - $469
J-Bracket w/ tensioner - $394
Belt - $60
Bypass valve - $370 (Big Red)
60# Siemens Mototron Injectors - $390
Crank Pinning Kit - $91.57
Fan - $159
Fran shroud - $125
Radiator hold down - $50
Aeromotive 340 fuel pump - 169.99

Total - $2537 <---This is what i was asking about, if maybe sometime in the future we could work out a deal. Im going to pick up a used head unit (seen ALOT of them go for $1800) +

So id be right at $4337 with a used headunit and all new parts.

As for the intercooler, im going to do a custom FMIC using a godspeed intercooler and charge piping from a place on ebay and its $200 for all of it.

Ill be using Glowshift guages... fuel pressure, AFR/wideband, and boost guage. guages come to $359

2-bar map sensor - $67.99
Silicon reducer (also from ebay) for the TB - $30

So my total setup is gonna run me - $4995, which i dont think is bad considering the only used part is the headunit itself, and this is with gauges.

Am i missing anything that you can see? Thanks alot for the help bob. And if there is anyway you can save me money, thatd b awesome! lol

I am gonna keep my eye out for used pullies/injectors too, to try to lower costs.

Thanks again!

-Josh

stealth355tpi

can i get a price for a complete d1sc with stock intercoolers and fmic/ race valve set up, thanks. at what level are the stock intercoolers good until? stock motor for now but down the road could be something built. i keep flip flopping between turbo or procharger, just trying to price each one out.

Bob@BruteSpeed

iTrader: (16)

It looks like you have everything listed that I can think of offhand except for the air inlet side. Below is the hat and filter that works with most front mount assemblies. Send me an e-mail to brutespeed@gmail.com and I'll e-mail you a copy of the ProCharger installation instructions. Thanks. Bob
http://shop.brutespeed.com/ATI-AIGI3...AIGI3I-015.htm
http://shop.brutespeed.com/ATI-AF057...AF057I-001.htm

Bob@BruteSpeed

iTrader: (16)

http://shop.brutespeed.com/ATI-1GJ20...-Speed-Kit.htm

The above link starts out with my complete package with the twin intercoolers, and at the bottom of the page there are options for deleting items as well as adding items, such as the front mount intercooler assembly. I'd go with the front mount intercooler if you're planning on running more than 12-14 psi of boost. Thanks. Bob

Bob@BruteSpeed

iTrader: (16)

ProCharger pushed the deadline back four more days to the 26, giving you a little more time to get your orders in! Bob

Bob@BruteSpeed

iTrader: (16)

The new price guides arrived today. The LS1 and LT1 F Body Systems went up $100.00, and the 3rd gen F Body Systems stayed at the same price they were last year. Same situation for many other models, some went up and some stayed the same. Bob

Bob@BruteSpeed

iTrader: (16)

The deadline is the 26th, so you have several more days to get your order in.
Check out this link for what ProCharger has been getting into.
http://shop.brutespeed.com/Polaris-P...ions_c1416.htm Bob