My long term project-672" BBC twin 94's
#1
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Jun 2007
Location: Virginia Beach,Virginia
Posts: 2,991
Likes: 0
Received 2 Likes
on
2 Posts
My long term project-672" BBC twin 94's
for those who don't visit the drag race section, I figured I would share my BBC project. I've been working on this engine for about 2 years now to replace the 436 SBC that used to power my 79 Z28 Outlaw 10.5 car that i've been racing since 1999.
This all started out a simple enough project but as with most projects it quickly got out of hand.
here's a basic rundown
Donovan raised cam 11.1 deck block
Crower 5.100 stroke billet crank with Olds mains and Hemi rod pins
GRP alum rods
JE domed pistons
Total seal rings
Brodix PB 2005 heads with Titanium valves
Keyway lifters
Jesel rockers
Marcella billet runner intake
Jesel belt drive
Manton pushrods
ATI balancer
2 550 lb injectors per cylinder
This all started out a simple enough project but as with most projects it quickly got out of hand.
here's a basic rundown
Donovan raised cam 11.1 deck block
Crower 5.100 stroke billet crank with Olds mains and Hemi rod pins
GRP alum rods
JE domed pistons
Total seal rings
Brodix PB 2005 heads with Titanium valves
Keyway lifters
Jesel rockers
Marcella billet runner intake
Jesel belt drive
Manton pushrods
ATI balancer
2 550 lb injectors per cylinder
Trending Topics
#14
TECH Senior Member
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
think you should convince phil to put something like that in his mustang to compete in ODR
#16
TECH Fanatic
iTrader: (10)
here's a basic rundown
Donovan raised cam 11.1 deck block
Crower 5.100 stroke billet crank with Olds mains and Hemi rod pins
GRP alum rods
JE domed pistons
Total seal rings
Brodix PB 2005 heads with Titanium valves
Keyway lifters
Jesel rockers
Marcella billet runner intake
Jesel belt drive
Manton pushrods
ATI balancer
2 550 lb injectors per cylinder
Donovan raised cam 11.1 deck block
Crower 5.100 stroke billet crank with Olds mains and Hemi rod pins
GRP alum rods
JE domed pistons
Total seal rings
Brodix PB 2005 heads with Titanium valves
Keyway lifters
Jesel rockers
Marcella billet runner intake
Jesel belt drive
Manton pushrods
ATI balancer
2 550 lb injectors per cylinder
Damn that is slow...