Good bye Twins hello Single front mount!!!!!!
#43
TECH Apprentice
iTrader: (7)
Join Date: Mar 2007
Location: texas
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
If you are wondering which of the Griffen Radiators will do this technically none if the 3 will do it BUT there are a few that have got away with the gri-1-25241-x
But I would personally dish the extra 100 bucks out and go for the gri-1-55241-x or gri-1-55241-xs.
But I would personally dish the extra 100 bucks out and go for the gri-1-55241-x or gri-1-55241-xs.
#45
It's funny because if you look at the number cast on the housing it's the same, they must of machined my cover. Yep lot's of turbos, I've run all 3, the 80/87 is the one I just took off, it was out of air at 12lb's, it was pushing some serious air but it was maxed. I don't know the horsepower but my 80lb injectors where at 77% duty cycle @70psi fuel pressure. 5100rpm.
#46
10 Second Club
iTrader: (27)
Join Date: Sep 2008
Location: Lake Tapps, WA
Posts: 2,229
Likes: 0
Received 0 Likes
on
0 Posts
Mike the air horn is not an air horn, its called a Noise attenuator. Simply there to reduce noise. Also the 83mm billet wheel has a larger exducer then the 82mm billet wheel so it will support more pressure and more power....by around 3 lbs/min or ~30hp. Also the smaller 87mm turbine will fall flat on a rear mount compared to the new 92mm LDP turbine you have. So the units are quite different then what he was sold.
583@10lb's my run is at the 2:00 minute mark, as you can see it spins the rollers pretty hard. it spun the tires on the dyno so the power stayed flat from 5100rpm on
#48
9 Second Club
Thread Starter
iTrader: (20)
Join Date: Sep 2007
Location: Saline, MI
Posts: 1,813
Likes: 0
Received 0 Likes
on
0 Posts
Mike the air horn is not an air horn, its called a Noise attenuator. Simply there to reduce noise. Also the 83mm billet wheel has a larger exducer then the 82mm billet wheel so it will support more pressure and more power....by around 3 lbs/min or ~30hp. Also the smaller 87mm turbine will fall flat on a rear mount compared to the new 92mm LDP turbine you have. So the units are quite different then what he was sold.
#52
10 Second Club
iTrader: (27)
Join Date: Sep 2008
Location: Lake Tapps, WA
Posts: 2,229
Likes: 0
Received 0 Likes
on
0 Posts
It's a Jake's 4L80E with a Torque Converter shop billet converter that came as a package from Jake's.
#54
9 Second Club
Thread Starter
iTrader: (20)
Join Date: Sep 2007
Location: Saline, MI
Posts: 1,813
Likes: 0
Received 0 Likes
on
0 Posts
does anyone know who JR gibson is? lol
http://www.workturbochargers.com/customers.html
#59
9 Second Club
Thread Starter
iTrader: (20)
Join Date: Sep 2007
Location: Saline, MI
Posts: 1,813
Likes: 0
Received 0 Likes
on
0 Posts
spool fast for a large single is what i should say. nothing is going to spool like the twins lol
but i should be easier for me to make the car come out of the hole.
the single should also free up some pounds. those twins are heavy. the intercooler is heavy as hell too with huge cast end tanks. i bet its 40lbs lol
but i should be easier for me to make the car come out of the hole.
the single should also free up some pounds. those twins are heavy. the intercooler is heavy as hell too with huge cast end tanks. i bet its 40lbs lol
#60
9 Second Club
Thread Starter
iTrader: (20)
Join Date: Sep 2007
Location: Saline, MI
Posts: 1,813
Likes: 0
Received 0 Likes
on
0 Posts
talk to my turbo guy today they just made 1067rwhp with one of there older 80mm turbos. there putting something like i got on soon. shooting for 1200whp. its on a ford 408. so things look good as far as power goes.