Turbo Firehawk build up V 3.0 AES 385 and S88
#361
Well quick update. I did stop by my parents house and checked on the car. (I needed my Hp tunners interface from the car) I fired it up and let it run for awhile. It was good to hear it run makes me itch to get back to racing.
I hace started gathering some parts. I ordered some fresh tire and Turbo blanket.
I am also made a big upgrade in the trailer department. I sold my Open 18ft trailer and bought a 24ft enclosed Haul Mark
I have also been busy working on converting my car port into a garage at my house. Will be nice when it is finished. 37'x16'
I hace started gathering some parts. I ordered some fresh tire and Turbo blanket.
I am also made a big upgrade in the trailer department. I sold my Open 18ft trailer and bought a 24ft enclosed Haul Mark
I have also been busy working on converting my car port into a garage at my house. Will be nice when it is finished. 37'x16'
#365
Well I have been busy working on the trailer getting the inside of it all ready for use. The trailer was completely unfinished inside. I painted all the walls white. I also painted the floor gray with an anti slip paint (gritty). I also installed two cabinets for storage. I also freed the car from my parents today so that I can start working on the few little things. I also took it for a spin today for the fist time in 3 months. ah it feels good to go fast again.
#379
well I made the trip to Cecil this past Saturday for there first Saturday TNT of the year.
It was really cold high 30s and windy. I was also the fastest car there all day of mahybe 40-45 racers. I made the outting on my old tires and the only change from last year was adding the turbo blanket.
Track prep was ok. I had to take about 3-400 rpm off my launch RPM to get the car to hook I also didn't turn the boost up too much maybe 14 psi.
I did manage to run a 9.6@143 on 8.5psi which I thought was pretty good.
I also ran a 8.99@154 with a 1.404 60' on 14psi car felt like it was skating around pretty good.
I did notice in some of my logs that my IAT senors is dropping out at times so I need to fix that. looks like it might be a pin tension issue.
I have video that I will try and get editied down and posted up later. Felt good to get out and run the car again
It was really cold high 30s and windy. I was also the fastest car there all day of mahybe 40-45 racers. I made the outting on my old tires and the only change from last year was adding the turbo blanket.
Track prep was ok. I had to take about 3-400 rpm off my launch RPM to get the car to hook I also didn't turn the boost up too much maybe 14 psi.
I did manage to run a 9.6@143 on 8.5psi which I thought was pretty good.
I also ran a 8.99@154 with a 1.404 60' on 14psi car felt like it was skating around pretty good.
I did notice in some of my logs that my IAT senors is dropping out at times so I need to fix that. looks like it might be a pin tension issue.
I have video that I will try and get editied down and posted up later. Felt good to get out and run the car again