Fairmont 2.0 (forged lq4, s480, 800whp, under new management)
#43
I'm thinking of using the zr1 cam in my 5.3 how do you relocate the cam sensor into the stock front cover
Your just dumping the exhaust up front with no muffler? it does not seem too loud
how do you weld the spiders in the rear is it stick welded
I have a ghetto 84 cutlass with iroc wheels on it getting ready to roll out in a few months same turbo and intercooler on a 5.3 home built th400 too with craigslist redneck 4000 stall,3.23 gear thanks for all the info
Your just dumping the exhaust up front with no muffler? it does not seem too loud
how do you weld the spiders in the rear is it stick welded
I have a ghetto 84 cutlass with iroc wheels on it getting ready to roll out in a few months same turbo and intercooler on a 5.3 home built th400 too with craigslist redneck 4000 stall,3.23 gear thanks for all the info
yeah if you dump the exhaust up front it is pretty quiet, we have done it on a bunch of cars haha.
i used a 110 argon mig to weld the spiders.
#56
its hard to say with the stalled auto but it is totally lit at 4k same as my friends truck with a 76mm...
it has tons of power at 3k partial throttle with boost, and i cant really use the stall much below that.
with the 2.73s if i roll on third gear at like 50 it really pushes the stall high like 4500
it has tons of power at 3k partial throttle with boost, and i cant really use the stall much below that.
with the 2.73s if i roll on third gear at like 50 it really pushes the stall high like 4500