Just Another JY 5.3 Build......
#1
TECH Resident
Thread Starter
iTrader: (17)
Join Date: Sep 2009
Location: Orlando Fl.
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
Just Another JY 5.3 Build......
I have been working on this for a few months now, i wasnt going to do a build thread but figured, why not......
Setup:
2001 Z28
2003 5.3
Spohn solids
LS6 intake
Ported stock tb
LS2 cam
LS6 springs
Flipped truck manifolds
32x13x4 Fmic
Homemade merge
Homemade DP (4inch)
44mm wastegate
On3 76mm .96
Trans:
Built RMVB Th400
FTI 3500 stall
BMR crossmember
Started out like this
Got the old motor out
New motor put together
All done and in the car
Now time to build the hotside, used truck mani's with v-bands welded on
Crossover/merge being made
Hotside pretty much done
Rad put back in
Also got the FMIC mounted
Bumper cut to fit the downpipe/FMIC
Pretty much how the car sits now
I still have a good amount of parts to gather up before i can turn her over.....
Setup:
2001 Z28
2003 5.3
Spohn solids
LS6 intake
Ported stock tb
LS2 cam
LS6 springs
Flipped truck manifolds
32x13x4 Fmic
Homemade merge
Homemade DP (4inch)
44mm wastegate
On3 76mm .96
Trans:
Built RMVB Th400
FTI 3500 stall
BMR crossmember
Started out like this
Got the old motor out
New motor put together
All done and in the car
Now time to build the hotside, used truck mani's with v-bands welded on
Crossover/merge being made
Hotside pretty much done
Rad put back in
Also got the FMIC mounted
Bumper cut to fit the downpipe/FMIC
Pretty much how the car sits now
I still have a good amount of parts to gather up before i can turn her over.....
#6
TECH Resident
Thread Starter
iTrader: (17)
Join Date: Sep 2009
Location: Orlando Fl.
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
The motor ran perfect before yanking everything out, I had already planned this build when I bought the car.....
I have driven a few cars with exhaust setups like this with no issues, little loud but that's something I'm used to.....
I have driven a few cars with exhaust setups like this with no issues, little loud but that's something I'm used to.....
Trending Topics
#8
So your just running this right out of the junkyard right? Stock head gaskets and hardware?
With the exception of the stuff mentioned above.
How much are you hoping to make with the on3 Turbo?
With the exception of the stuff mentioned above.
How much are you hoping to make with the on3 Turbo?
#9
TECH Resident
Thread Starter
iTrader: (17)
Join Date: Sep 2009
Location: Orlando Fl.
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
Stock headgaskets/headbolts for now, although i have been thinking of throwing in some head studs just to be safe, as far as set goal im looking for around 600whp, should be plenty for the street.....
#10
We have the same power goals.
I was tossing the idea of head studs as well just to be safe. Looks good and finally a thread that I can follow with similar goals and I'm assuming your trying to make this budget friendly?
I was tossing the idea of head studs as well just to be safe. Looks good and finally a thread that I can follow with similar goals and I'm assuming your trying to make this budget friendly?
#16
TECH Resident
Thread Starter
iTrader: (17)
Join Date: Sep 2009
Location: Orlando Fl.
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
I didn't do it for the iron block, I did it because the ls1 had a good amount of miles on it, and for what I plan On doing power wise later on the ls1 wouldn't handle it.....