most compression with boost? (success stories?)
#45
Bringing this one back up.
I have an 11.3:1 416 cu in engine and trying to see if I ran pump 93 with meth injection on top of it will I be ok or will I have to go to something like 110 fuel or c16 with meth?
I have an 11.3:1 416 cu in engine and trying to see if I ran pump 93 with meth injection on top of it will I be ok or will I have to go to something like 110 fuel or c16 with meth?
#47
It has a cam for nitrous in it right now. It was spec'd by Geoff@EPS for L92 heads and a 300 shot. The specs on it are 240/251 .640/.637 on a 114. I would most likely change it for something more boost friendly if that looks like it wouldn't work.
#49
FormerVendor
iTrader: (3)
Even though that is a pretty big cam, unless you're going to run a blower like a centrifugal or a roots it's not going to work well with a turbo unless the turbo you're going to use has a 111mm or bigger turbine(which is what you should use on a 418) and even then it's slightly bigger than what I would use.
#50
Even though that is a pretty big cam, unless you're going to run a blower like a centrifugal or a roots it's not going to work well with a turbo unless the turbo you're going to use has a 111mm or bigger turbine(which is what you should use on a 418) and even then it's slightly bigger than what I would use.
#51
On The Tree
Join Date: Jan 2015
Location: southeast texas
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
just curious
Curious about a procharger p1sc tuner kit for say 6-8 lbs intercooled 2 or 3 core if I can fit it.
Last edited by str8nsty; 03-09-2015 at 03:02 AM.