Enough Room for s91??????? Stock radiator and condensor moved forward.....
#41
Launching!
iTrader: (3)
Join Date: Oct 2011
Location: Bay View, WI
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Not sure where you came up with that. S91 = S400-HP91
http://forcedinductions.com/productsborgwarner.htm
Compressor cover diameter is around 10.5" and the same goes for the turbine housing with the T6 flange. It's also about 10.5" from the down pipe flange to the air filter inlet.
http://forcedinductions.com/productsborgwarner.htm
Compressor cover diameter is around 10.5" and the same goes for the turbine housing with the T6 flange. It's also about 10.5" from the down pipe flange to the air filter inlet.
Last edited by Outlaw666; 01-06-2014 at 10:21 AM.
#44
FormerVendor
iTrader: (3)
Not sure where you came up with that. S91 = S400-HP91
http://forcedinductions.com/productsborgwarner.htm
Compressor cover diameter is around 10.5" and the same goes for the turbine housing with the T6 flange. It's also about 10.5" from the down pipe flange to the air filter inlet.
http://forcedinductions.com/productsborgwarner.htm
Compressor cover diameter is around 10.5" and the same goes for the turbine housing with the T6 flange. It's also about 10.5" from the down pipe flange to the air filter inlet.
OP are you using a 96mm turbine 1.32 ar hotside unit or a different AR(1.0, 1.15, 1.45 etc.) 111mm turbine unit?
Are you thinking that the HP91 and S91 share the same turbine cover even though the exhaust side is different? I don't think that's the case(no pun intended) though?
#45
TECH Fanatic
Thread Starter
Im between the s400-91hp and the gt91 for my build plans. Both seem to be pretty good prices. Think one is 1599 and other 1699 on fi website. Both ive seen used on builds yield good results so guess probably couldnt go wrong either way.
#47
TECH Fanatic
Thread Starter
That's what i hear everyone saying. Was measuring today and if i get a smaller condenser like a 12x24 to be exact it will fit right under hood latch and then can move radiator that much more forward. May have to trim fan shroud a bit but believe i can get 11" of clearance from back of radiator to front of ps pulley. I wanna mount my turbo there in front of power steering pump. Do abs delete.
#50
10 Second Club
iTrader: (22)
Join Date: Mar 2006
Location: Northwest side of Chicago
Posts: 3,677
Likes: 0
Received 2 Likes
on
2 Posts
Im going to be trying a very similar setup. I already have my radiator forward to fit a comp ct5 turbo. But id love to get a big bw in. there. I was thinking of getting rid of the hood latch for some pins and a smaller condensor.
#51
TECH Fanatic
Thread Starter
Found a globle brand universal 12x24 on ebay today for sixty bucks.. Have to chg ends on lines or whatever to make work
Last edited by mrstepheneades; 08-20-2012 at 02:31 PM.
#53
TECH Fanatic
Thread Starter
Originally Posted by 93camaro_zzz
Look to Killer-Ls1 I think his screen name is, for reviews on the GT91 turbo.
Me personally I would definitely go with the S400-HP91. I would not skimp on price on the most important piece of a turbo system.
Me personally I would definitely go with the S400-HP91. I would not skimp on price on the most important piece of a turbo system.
Posted from LS1Tech.com App for Android