Turbonetics 6665 Twin Turbo build, Fab process started Post #71! finally!
#67
pretty sure im getting this to move those damn power steering lines... Im thinking the ABS needs to go too.
http://vtsql.gkvbf.servertrust.com/p...it-p/cbr45.htm
The lines that run to the drivers side radiator, are those necessary to keep? Cuz id like to get rid of those as well..
http://vtsql.gkvbf.servertrust.com/p...it-p/cbr45.htm
The lines that run to the drivers side radiator, are those necessary to keep? Cuz id like to get rid of those as well..
#71
Decent update
well, i got quite a bit of work done tonight. finally got my buddy over to let me use his fabrication skills. Go the passenger side tubing fabbed up from the manifold to the turbo, and started a down pipe. Everything went pretty damn smooth and had a lot of fun building it. We managed to keep the tubing above the sway bar which is good for me since it is a street car. im happy with the way it is turning out. Soon as i get my headers sold, i will order my intercooler and cold side so ill have it to get started soon. We will finish the drivers side up on monday or tuesday. We are just tack welding everything in place right now. Im sending it off with him to where he works and have all the seams TIG welded. We will finish the DPs when the new motor is here and i can get my k-member on. I just need to get them sitting in place and get the cold side done so i can pull the motor and start cleaning, painting and doing everything else.. enjoy
Last edited by allout06; 12-29-2012 at 01:50 PM.
#73
ya i am, degreased, cleaned, then painted. Ive been lookin at the SJM ABS delete, i have their line lock. Still on the fence on deleting it. I have the drivers side mocked up to where i can keep it if i need to. I need to figure out what to do with my fuse boxes. i really really dont wanna cut the wires and re-route those damn things. i found a thread on here where a guy relocated them without cutting anything, wish i could find it again.
#74
11 Second Club
iTrader: (43)
ya i am, degreased, cleaned, then painted. Ive been lookin at the SJM ABS delete, i have their line lock. Still on the fence on deleting it. I have the drivers side mocked up to where i can keep it if i need to. I need to figure out what to do with my fuse boxes. i really really dont wanna cut the wires and re-route those damn things. i found a thread on here where a guy relocated them without cutting anything, wish i could find it again.
#75
LS1Tech Sponsor
iTrader: (65)
Looking very good! I am glad I could be of help for your build, let me know if you need anything else!
Jon
Jon
__________________
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed