UPDATE: test runs pg11 **Methanol 403 LsX -"Torque Stopper" intake 101mm Turbo '87 GN
#43
FormerVendor
iTrader: (3)
The power potential that turbo is capable of making is absolutely ridiculous. That turbo has the capability of propelling this car into the 4.60@155mph range with the right tune, suspension settings and converter.
#45
FormerVendor
iTrader: (3)
http://www.yellowbullet.com/forum/sh...d.php?t=540353
#46
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Jan 2012
Location: Alexandria, Ky
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
BTW, susp revamp will come this year (after engine is in and running), first before any passes I'm adding an anti-roll bar.
Seriously? Have you read this thread for ***** and giggles? I know it's the internet and just conversation, but there is some really interesting information being tossed around in there.
http://www.yellowbullet.com/forum/sh...d.php?t=540353
http://www.yellowbullet.com/forum/sh...d.php?t=540353
#47
LS1Tech Sponsor
iTrader: (10)
Torque stopper??? Am I missing something in this thread? This BMF machine should be able to straight knock the tires off at the hit! We run a short huge runner in comparison with the drag car and can kill the tires at will (35x17.5x16).
BMF I do not think you will have any issue with the stock coils and ECU. Should work good IMO.
BMF I do not think you will have any issue with the stock coils and ECU. Should work good IMO.
#48
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Jan 2012
Location: Alexandria, Ky
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
Torque stopper??? Am I missing something in this thread? This BMF machine should be able to straight knock the tires off at the hit! We run a short huge runner in comparison with the drag car and can kill the tires at will (35x17.5x16).
BMF I do not think you will have any issue with the stock coils and ECU. Should work good IMO.
BMF I do not think you will have any issue with the stock coils and ECU. Should work good IMO.
What plugs would you suggest starting with? NGK 9's? What Gap?
thanks in advance.
#51
FormerVendor
iTrader: (3)
Torque stopper??? Am I missing something in this thread? This BMF machine should be able to straight knock the tires off at the hit! We run a short huge runner in comparison with the drag car and can kill the tires at will (35x17.5x16).
BMF I do not think you will have any issue with the stock coils and ECU. Should work good IMO.
BMF I do not think you will have any issue with the stock coils and ECU. Should work good IMO.
#55
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Jan 2012
Location: Alexandria, Ky
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
I couldn't help myself.
Martin, I just noticed your question about the going rate of 106mm's now days. I must have totally over-looked it. I am always watching for turbos, 106's have been sold for $800 to 1300 in the past 9 months. Pretty crazy price for what you get if your able to make one work.
Martin, I just noticed your question about the going rate of 106mm's now days. I must have totally over-looked it. I am always watching for turbos, 106's have been sold for $800 to 1300 in the past 9 months. Pretty crazy price for what you get if your able to make one work.
#58
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Jan 2012
Location: Alexandria, Ky
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
Only thing I can figure is demand. How many people need and can properly use/spool a 106mm turbo? Heck my 98/101mm in all reality is bigger than I need but the price was right. 88mm and smaller gets pricey until you get down to or below a 70mm in the used market. All these v8's that now have turbos on them in the past 10yrs or so have blown the demand sky high on that range of turbo, hence driving the price up on used units. I think the main reason you see 98mm to 106mm's cheap anymore Is for two reasons; One most classes are limited to 88 mm and smaller turbos, And two most of the turbos in this area are an older design.
#60
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Jan 2012
Location: Alexandria, Ky
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
Lil update, waiting on rotating assemble to get balanced before any more progress happens. The Moran 500's should be ready early March I'm told so I guess no real hurry but still be nice to get everything in the car and start fabbing the add-on to the hot side and Alky sys too. In due time I suppose.