Copper Head Gasket Spray ?s
#1
TECH Resident
Thread Starter
iTrader: (6)
Join Date: Sep 2008
Location: SoCal, SFV
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
Copper Head Gasket Spray ?s
I'm in the process of putting together a stock 4.8 w/ LS1 gaskets and Alper head studs. Stock 862s. Real budget motor. Looking to eventually push 15lbs with my Huron Speed truck kit and a TC78 or if I come up on a good deal a PT7675. All this in my 99 SS 6spd car. Also will be running a Vic Jr eventually.
So here's my question, a friend suggested using Copper head gasket spray and said it will help from pushing water/added insurance. I searched it but couldn't find to much on it then again who can ever find **** on this site anymore. Pro's vs Con's? Do's/Don'ts?
So here's my question, a friend suggested using Copper head gasket spray and said it will help from pushing water/added insurance. I searched it but couldn't find to much on it then again who can ever find **** on this site anymore. Pro's vs Con's? Do's/Don'ts?
#2
#4
On The Tree
iTrader: (2)
Join Date: Nov 2008
Location: Tuscumbia,Al
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
My buddy builds Grand nationals for a living making crazy hp on tons of boost and he swears by copper spray he uses it on every build from restoring one to just stock to 8 & 7 sec 1/4 mile cars he sprays everything head gaskets turbo flange gaskets exhaust flange gaskets so it's good stuff so I definitely recommend using it
Trending Topics
#8
On The Tree
For the guys who are spraying their gaskets,are all of you using the drill the rivets and spray each layer method or are some of you just spraying the top and bottom?