Forced Induction Superchargers | Turbochargers | Intercoolers

Dual meth nozzle placement

Thread Tools
 
Search this Thread
 
Old 10-17-2013, 11:21 AM
  #81  
8 Second Club
iTrader: (4)
 
Forcefed86's Avatar
 
Join Date: May 2011
Location: Wichita, KS
Posts: 7,952
Received 725 Likes on 532 Posts

Default

Originally Posted by Ford_Assassin
Spraying pre turbo has my interest, except I worry about the BOV allowing vaporized meth out when letting off the throttle too. I wouldn't want an invisible fireball running through my engine compartment. I guess I would just need to be careful of its placement....
If you use a small enough nozzle pre-turbo it should technically all “flash” before it hits the BOV. You would just need to run a large nozzle post BOV as well.

Few buick guys running two kits. One with small nozzles and straight water or washer fluid for pre-turbo. Then 100% meth at the throttle body with big nozzles.



Quick Reply: Dual meth nozzle placement



All times are GMT -5. The time now is 09:12 AM.