pyro719

iTrader: (5)

That car is so badass!

novaflash2002

iTrader: (51)

I did not read all the posts, but that's new stock engine record correct?

runsfromdacops

stop going so fast, your going to drive the price of JY motors up!!

BES Stroked Nova

iTrader: (24)

deff going turbo on my nova build(still in the planning stages)

gives me lots of hope! LOL

MIGHTYMOUSE

iTrader: (59)

impressed good job hope it hangs in there for a few more pulls!

a-low

iTrader: (26)

I sent the link to this thread to a cousin of mine ,he refused
to believe and called bs/ impossible lol. What can you expect from
a jdm guy lol. Think this turbo will do well on a 5.3?

Twin turbo c5

Yeah that usually happens. I think the price of 6.0 stuff has went already around here. But this car gives me hope in my junkyard projects I build.

MillsMotorvation

CR is around 9;5-9;7, Its got stock 317 heads, with hand port job from me. 408ci LQ9. 239/247 cam at 624 lift, GT91 108AR. I was thinking my KR sensors stop working, but they pickup me banging on the exhaust! Just need to know im not hurting the engine. Wish I could see a timing table to compare mine with. Its in a 1981 TTA,4L80E 3600 stall, 3.08 gears, car weigh 4000lbs.

Forcefed86

iTrader: (4)

Is the motor in the nova pre or post 2005?

Are the 2005+ 6.0's that much stronger? Would you be just as comfortable leaning on an older 6.0?

Twin turbo c5

Might have missed it but are you using stock ecm with hp tuners to do your tuning?

87silverbullet

iTrader: (11)

The 2005+ motors have the beefier rods so they should be able to handle a bit more that the older motors

He has the Holley HP system.

gallo-lo

iTrader: (11)

How can I post pics??
Im almost done with my 71nova Lq9 twins s366+t4 Tu2cam PowerGli calTracula testing 315draKRadial, hoping to set records.

navyblueSS

iTrader: (1)

Very nice, car is rollin out!

Motivational1

Stock48 I see you went back to Famoso and got it to run good. I am the one with the Burnt orange 67 Camaro in Limited 10.5 that ran 5.28@133.74mph that you came over and talking with. I was telling you my son wants to do his 70 Nova just like yours too. Keep up the good work.

MIke

stock48

iTrader: (17)

Thanks for the good words guy's! Hope she hangs in until I can get new engine together, and trans as well

stock48

iTrader: (17)

Hey good to see you on here. Beautiful quick car you guys have there, it is set up a lot like mine. I didn't want to bug you too much down there I know how it is trying to race with everyone swarming.. lol

a4ls2goat

Oh my.
That thing is pure sex!

TurboS10

iTrader: (12)

He's running complete stock bottom with the newer stock rod, new stock rings gapped at 0.022 with arp head studs, 218/218/112 .570 cam
8.5 10 blt, 3.23, spool, and probably 33 spline and the original 275/60 MT radial, full cal tracs setup
Holley HP Efi, 2000cc FIC's, 4303 magnafuel, PG w 1.76, SC3000 or PY3400

From what I've read, the early rod will bend at 100hp less than this power level. Calcs put him at 1000+.

I've got a nova so I'm keeping close track on J's antics.

a98ws6

iTrader: (48)

I must have missed it but whats the intercooler setup on the nova?

djt81185

iTrader: (3)

You have any dimensions on that Turbo? Wondering if it would fit in my car. height width length?