Robbie Wilson

So does anyone know if this will fit on a 5.3? with a holly alt-powersteering bracket? (since truck blocks don't have mounts for the alt. It looks like it might fit but the driver side header would be close.

Should it fit 5.3 and 6.0 otherwise? or are the blocks different sizes?

Superman09

iTrader: (65)

Yes, it will fit a 5.3l, 5.7l, 6.0l etc etc block. No issues! If your alternator is not in the factory position due to an iron block, we can include our alternator relocation kit in with the kit that puts it on the passenger side head

Ws6Dnero

iTrader: (23)

If only this was for the ac retaining kit

blackbird0230

Why not 321 stainless?

Superman09

iTrader: (65)

Beefed up the hot side components (manifolds and crossover) to .120 wall tubing. With this the cost of 321 would have put us too high and no benefits would have been seen that the .120 wall 304 stainless won't give just as well to you

Eiyse98ls1

are these kits being made to order in house?

Superman09

iTrader: (65)

They are being made in bulk for the group purchase so we can keep the pricing down for you. We can absolutely build them per order for you however, PM me in interested!

Superman09

iTrader: (65)

We have 2 more people almost ready to jump in!! This will get your pricing down another $100 for the kit!

blackbird0230

That's basically what I'm holding out for too. I have a couple of questions about my setup but hoping to order sometime this week or next

Superman09

iTrader: (65)

Well once one more jumps in, I bet another will follow very shortly after as they will guarantee the price drop!

Robbie Wilson

Sweet! That is awsome!

I'm waiting for a price drop as well. I would hate to be 10th and never get the 100$

(I still need thousands of dollars to complete it though... lol. 9inch, transmission, stall, driveshaft, fuel pumps, injectors, fuel lines, fuel regulators, fuel filter, cam, head gaskets, valve springs, turbo, wastegate, eboost, tune, harness, computer, ls6 intake manifold, fuel rails, bov's, wheels, tires, brakes!, rear sway bar, lca/brackets, panhard bar lolol. I need this thing to be as cheap as possible guys! come on I know more than ten people are going to buy this?!

01Z28Camaro

I don't believe your post is helping sell more kits, showing people all the stuff they may need will make them less likely to make the impulse buy.

Superman09

iTrader: (65)

haha, true but you don't NEED all of those parts at all. You can have plenty fun and make a 600 rwhp street car with far less, all depends on what you want to do with the car. A turbo kit doesn't warrant a track suspension set-up, 9" rear, computer, harness, brakes, drag wheels, etc etc. That's all up to what you want to do with the car

I will also guarantee that the list will NOT stop at 10 people.If the list gets to 10 but never to 11 for another price drop, I will give everyone the $100 off anyway to show my confidence! I am guessing we will end up around 20 people!

WantSOM

iTrader: (2)

Order placed...now I need to decide which turbo to use!

Sales1@Texas-speed

Bump for great deal!


Aaron@Texas-Speed

Superman09

iTrader: (65)

One more for the price drop!!

Superman09

iTrader: (65)

One more for the price drop!!

Ws6Dnero

iTrader: (23)

I want the revised ac kit

Robbie Wilson

jeez. Well I'm really REALLY close to ordering this thing. It's been my dream to have a turbo lsx ever since I was 15 years old. I always wanted to have a fast street car that would be able to hang with the best of them!

Consider me on the list. I'll most likely order after march 1st because that is when my rent is due. I want to make sure all the bills are paid before buying a tubro kit! haha

Superman09

iTrader: (65)

Certainly! You will love this new kit design!