Head Gasket Recommendations
#1
TECH Resident
Thread Starter
iTrader: (23)
Join Date: Jul 2005
Location: memphis, tennessee
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
408 iron block - s480 ect...
the heads Im running are TEA stage 3 blower heads that have been o-ringed for boost.
I was informed to not use an MLS gasket since they are o-ringed and would not seal properly.
I was suggested to use Fel-PRO PT9199 - but after doing some reading up on them Fel-Pro states to not use these in high boost applications.
So here I am asking for suggestions.
the heads Im running are TEA stage 3 blower heads that have been o-ringed for boost.
I was informed to not use an MLS gasket since they are o-ringed and would not seal properly.
I was suggested to use Fel-PRO PT9199 - but after doing some reading up on them Fel-Pro states to not use these in high boost applications.
So here I am asking for suggestions.