SDCE finished....
Thread Starter
TECH Senior Member
iTrader: (16)
Joined: Oct 2002
Posts: 6,907
Likes: 6
From: Albuquerque, NM
That sucks frank, I really wanted to have it done on friday, but things were delayed by ATI. I will try and make a good pass this coming friday. On a good note, Rich Ford here in Alb, called me up and scheduled an interview for this monday@10 am. I just hope I get it, I need to work bad.
J
J
11 Second Club
iTrader: (20)
Joined: Sep 2002
Posts: 2,684
Likes: 3
From: Albuquerque NM - The Land of 8000ft DA
Originally Posted by frcefed98
That sucks frank, I really wanted to have it done on friday, but things were delayed by ATI. I will try and make a good pass this coming friday. On a good note, Rich Ford here in Alb, called me up and scheduled an interview for this monday@10 am. I just hope I get it, I need to work bad.
J
J
You better get the job, my wife wants a lightning!
EDIT: BTW Jer, I was checking DA's the other night and it seems that its better at night. The DA Sat. at 10 in the morning was 7900ft and at 11pm it was just over 7000.
Last edited by sscam68; May 24, 2004 at 01:23 PM.
Thread Starter
TECH Senior Member
iTrader: (16)
Joined: Oct 2002
Posts: 6,907
Likes: 6
From: Albuquerque, NM
Frank that is just insane I hate that we are up so high but ALB such an awesome place to live weather wise. The interview with Rich Ford went well, but they are kinda limited on benefits from the get go, you have to work there 6 months to see anything. Normally that would be good, but I have a little one that I need insured at all times. I just finished taking that TWO HOUR ASSessment test at the Bell Group I now have to wait 10 days for a phone call from them, what a joke that test was.
Bomax, I am sure I haven't seen peak boost yet, I still a had quite the way to wind it out. Boost comes up pretty quickly, I will get more testing done this week. My morning was spent driving the Mountaineer around looking for work
J
I now have to wait 10 days for a phone call from them, what a joke that test was.Bomax, I am sure I haven't seen peak boost yet, I still a had quite the way to wind it out. Boost comes up pretty quickly, I will get more testing done this week. My morning was spent driving the Mountaineer around looking for work
J
Trending Topics
Did you have another pulley on before this, or is this the first time you've ran the blower? I'm interested in the SDCE kit because someone else claimed that they had an immediate jump in boost (i.e. when they mashed the gas instead of starting at 4psi and building it started at 6) than on the fixed tension (stock ATI) setup, and their peak boost was also increased. So I was seeing if you also saw these two nice features... 
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
TECH Senior Member
iTrader: (16)
Joined: Oct 2002
Posts: 6,907
Likes: 6
From: Albuquerque, NM
Bomax, I guess you missed my mega post's on the cog set ups(one of the first to try that set up) and my MMS 3.2 troubles way back in the day. This is going on to be my third pulley set up just on the ATI kit.......I won't even get into the PD s/c kit I had before this one. Let me get some more testing done and I will post up my thoughts and expirences with the SDCE kit, just give me a day or two. I had to go search for a job today and I wasn't driving the bird
Thread Starter
TECH Senior Member
iTrader: (16)
Joined: Oct 2002
Posts: 6,907
Likes: 6
From: Albuquerque, NM
Thanks Flynblu, No doubt on taking the car to the interview....I did tell the guy at Rich Ford that I was a carguy by nature and I like to work on all cars except for Fords he didn't smile back at me though
Guess that was kind of dumb to do at a ferd dealership lol.
No problem Bomax, I just hope to the no slip belt gods that everything works as smoothly as it has so far.
J
he didn't smile back at me though Guess that was kind of dumb to do at a ferd dealership lol. No problem Bomax, I just hope to the no slip belt gods that everything works as smoothly as it has so far.
J
