Holley HP Question
Holley HP Question I am ditching my BS3 this Winter and going with the Holley HP system. All I need to get is the computer and the LS harness correct? What is the best price people have found it for?
computer and holley specific harness, for your engine, make sure you get 24x or 58s right of course, members have chimed in before that there are great places to buy these from and places with the best support over the phone etc, so i will let them chime in on that
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
On The Tree
Joined: May 2012
Posts: 175
Likes: 0
Injectors are seperate, input/output harness is separate. Converted my gen1 with their kit and extra sensors like fuel pressure and oil pressure were seperate as well, don't know if that's included with the LS harness. One thing to consider is the tech support of jegs and holley, in my experiences it wasn't that great, if you buy from more of a race shop you can often get better base tunes and better tech support should you run into anything.
Are you not going to the davis technologies traction control? Something to think about is what all you need to be controlled. The dominator has way more control with the inputs and the PWM outputs. Boost control, fuel pumps, fans, traction control, nitrous controller, etc. If you don't need them, then it's the same software.
I was going to order the hp as well, but I would be to close to the limits of the inputs and wouldn't be able to add the traction control down the road. So I'm just going to get the dominator from the get go.
I was going to order the hp as well, but I would be to close to the limits of the inputs and wouldn't be able to add the traction control down the road. So I'm just going to get the dominator from the get go.
there are so many diff combos, injector types, reluctor types, LS1, LS2, etc that you need to order correct harness's
They have a one part #(HP) for basic LS1 24 rel. that has all in one, but as you get away from that then you need to customize
They have a one part #(HP) for basic LS1 24 rel. that has all in one, but as you get away from that then you need to customize
Are you not going to the davis technologies traction control? Something to think about is what all you need to be controlled. The dominator has way more control with the inputs and the PWM outputs. Boost control, fuel pumps, fans, traction control, nitrous controller, etc. If you don't need them, then it's the same software. I was going to order the hp as well, but I would be to close to the limits of the inputs and wouldn't be able to add the traction control down the road. So I'm just going to get the dominator from the get go.
Last edited by THADD; Nov 10, 2014 at 08:40 AM.
