Project Hairy Banana (1967 Camaro single turbo)
#41
8 Second Truck Club
iTrader: (32)
It worked really good. I did run into one problem though. I ran both pumps on all the time and the magnafuel regulator got out of its "comfortable range" when trying to dial the pressure down to 43 psi. It would stop gaining pressure with boost after about 10-12 psi. I did a mountain of things trying to fix it and nothing worked. Finally I swapped to the big Aeromotive regulator and all was well with the world.
The lesson to learn there was that 2 4303's at 43 psi probably flow 4.5 gallons a minute or so of fuel.....way beyond most smaller belt driven pumps.
Data log said I was using around 1000-1100 lbs/hr of fuel and the pumps had no issue keeping up.
Anyway, there is a ton of tech info about it on the bullet and pt.net. Just search my screen name for threads that I have started.
The lesson to learn there was that 2 4303's at 43 psi probably flow 4.5 gallons a minute or so of fuel.....way beyond most smaller belt driven pumps.
Data log said I was using around 1000-1100 lbs/hr of fuel and the pumps had no issue keeping up.
Anyway, there is a ton of tech info about it on the bullet and pt.net. Just search my screen name for threads that I have started.
#42
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Updates:
Air/air intercooler ordered from Shearer Fabrications, thanks Ron!
Precision wastegates ordered from Motion Raceworks, thanks Doug!
Just sent some $ to Jonathon Capizzi!
Have to pick up my BOV from local friend Regis C.
TH400 trans built by Pete @ POP Wiring and Andy Vogt
Air/air intercooler ordered from Shearer Fabrications, thanks Ron!
Precision wastegates ordered from Motion Raceworks, thanks Doug!
Just sent some $ to Jonathon Capizzi!
Have to pick up my BOV from local friend Regis C.
TH400 trans built by Pete @ POP Wiring and Andy Vogt
#45
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Updated build list:
5.3 LM7 shortblock, SBE
799 heads, zero decked
Turbo kit by Anthony Manna
E85
TH400 by Caira Automotive
Baker Engineering cam
Air/air intercooler ordered from Shearer Fabrications, thanks Ron!
Precision wastegates ordered from Motion Raceworks, thanks Doug!
S485 turbo purchased from Jonathan Capizzi
BOV, used, purchased from local friend Regis C
TH400 trans built by Pete @ POP Wiring
Ron Rhodes tubular front core support
Still need to purchase:
Holley Dominator EFI, coils, dash, injectors
Fuel system
Brakes
Driveshaft
5.3 LM7 shortblock, SBE
799 heads, zero decked
Turbo kit by Anthony Manna
E85
TH400 by Caira Automotive
Baker Engineering cam
Air/air intercooler ordered from Shearer Fabrications, thanks Ron!
Precision wastegates ordered from Motion Raceworks, thanks Doug!
S485 turbo purchased from Jonathan Capizzi
BOV, used, purchased from local friend Regis C
TH400 trans built by Pete @ POP Wiring
Ron Rhodes tubular front core support
Still need to purchase:
Holley Dominator EFI, coils, dash, injectors
Fuel system
Brakes
Driveshaft
#46
TECH Fanatic
iTrader: (2)
Join Date: Mar 2012
Location: Macon Ga
Posts: 1,176
Likes: 0
Received 0 Likes
on
0 Posts
On the fuel system I use the twin 4303 and the aeromotive reg plus one pump all the time and one on with boost. This is on my Camaro peg 1500rwhp but fuel usage at 26lb of boost was 2216. On my daily truck on race gas dyno 1208rwhp I run two 450 Waldron pump one all the time and one on boost. Both car and truck on gas. So e85 on the truck I would need one more pump. Hope this will help you.
#47
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Nice, thanks for the info.
One of my buddies (Chris Johnson) is going to fab me up a fuel system, details to come.
Picked up up my S485 from Jon Capizzi this weekend. Big un!
One of my buddies (Chris Johnson) is going to fab me up a fuel system, details to come.
Picked up up my S485 from Jon Capizzi this weekend. Big un!
#55
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
From the builder, Ron Shearer, Shearer Fabrication
http://shearerfabrications.com/?SID=...u90mj28peaamb0
1200hp Garrett core, 4.5" thick, 30" overall width. $1199 with VBands.
#58
Nice build, nice kitchen too - looks like you can do some serious cooking with that oven.
Love the first gen Camaros. I passed up some opportunities to get one fairly inexpensively when I was a young man, regret that now.
Love the first gen Camaros. I passed up some opportunities to get one fairly inexpensively when I was a young man, regret that now.
#59
Updated build list:
5.3 LM7 shortblock, SBE
799 heads, zero decked
Turbo kit by Anthony Manna
E85
TH400 by Caira Automotive
Baker Engineering cam
Air/air intercooler ordered from Shearer Fabrications, thanks Ron!
Precision wastegates ordered from Motion Raceworks, thanks Doug!
S485 turbo purchased from Jonathan Capizzi
BOV, used, purchased from local friend Regis C
TH400 trans built by Pete @ POP Wiring
Ron Rhodes tubular front core support
Still need to purchase:
Holley Dominator EFI, coils, dash, injectors
Fuel system
Brakes
Driveshaft
5.3 LM7 shortblock, SBE
799 heads, zero decked
Turbo kit by Anthony Manna
E85
TH400 by Caira Automotive
Baker Engineering cam
Air/air intercooler ordered from Shearer Fabrications, thanks Ron!
Precision wastegates ordered from Motion Raceworks, thanks Doug!
S485 turbo purchased from Jonathan Capizzi
BOV, used, purchased from local friend Regis C
TH400 trans built by Pete @ POP Wiring
Ron Rhodes tubular front core support
Still need to purchase:
Holley Dominator EFI, coils, dash, injectors
Fuel system
Brakes
Driveshaft
Sounds like a solid game plan....
Couple questions....
~What headgaskets (hoping someone would give the Athenas a shot with a sbe/ oem head build.) ?
~Will you share your basic tune approach to making this beast durable (timing relative to boost) ?
~How do you plan on zero decking a sbe ?
~Considering softening the chamber ?? (super cheap and worth it's weight while dealing with a detonation sensitive build. Tooley did mine...and wow made a difference with sensitivity to detonation or I should say lack there of).
~Didn't see anything mentioned about rear suspension setup (maybe I overlooked it)
~With those lofty rpm goals, what is the game plan with the valve train (lifter, valve weight, springs, rockers) ??
Definitely a cool build...
.
Last edited by LSOHOLIC; 09-16-2017 at 10:06 PM.
#60
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Sounds like a solid game plan....
Couple questions....
~What headgaskets (hoping someone would give the Athenas a shot with a sbe/ oem head build.) ?
~Will you share your basic tune approach to making this beast durable (timing relative to boost) ?
~How do you plan on zero decking a sbe ?
~Considering softening the chamber ?? (super cheap and worth it's weight while dealing with a detonation sensitive build. Tooley did mine...and wow made a difference with sensitivity to detonation or I should say lack there of).
~Didn't see anything mentioned about rear suspension setup (maybe I overlooked it)
~With those lofty rpm goals, what is the game plan with the valve train (lifter, valve weight, springs, rockers) ??
.
Couple questions....
~What headgaskets (hoping someone would give the Athenas a shot with a sbe/ oem head build.) ?
~Will you share your basic tune approach to making this beast durable (timing relative to boost) ?
~How do you plan on zero decking a sbe ?
~Considering softening the chamber ?? (super cheap and worth it's weight while dealing with a detonation sensitive build. Tooley did mine...and wow made a difference with sensitivity to detonation or I should say lack there of).
~Didn't see anything mentioned about rear suspension setup (maybe I overlooked it)
~With those lofty rpm goals, what is the game plan with the valve train (lifter, valve weight, springs, rockers) ??
.
-Tune I have some ideas, but planning to have Jon Capizzi help with a base tune.
-I had the heads decked, the block won't be. I'm tempted to check the ring gaps though.
-Softening the chamber, not familar. I will research.
-This car has full tubs and ladder bars. It needs newer and better rear shocks.
-LS7 lifters, stock 799 valves, BTR .660 springs, stock rockers. SBE baby. Eventually a nicer shortblock....