Project Hairy Banana (1967 Camaro single turbo)
#101
TECH Junkie
iTrader: (9)
For sure the reluctor discussion is far from over.
As for fuel pumps the OG race only guys almost ALL run belt drive mechanical pumps. Us electric guys man there is some wildly varying approaches. Iirc mighty Mouse went 8's on three 255's dangling loose in the tank held together with hose and regular hose clamps.
I saw a thread once with a couple of well known aftermarket jumbo pumps taken apart only to show a couple or three standard fuel pumps in there so?
I was almost all set on using a couple of Bosch pumps but they have become so prone to knock offs its hard to find real ones. In personal use I have had excellent results with the 255 walboros in terms of durability and good pressure. Maybe thats the way to go?
Be interesting to see what you end up using here. Still lots for us to learn
Fun times putting a car like this together
As for fuel pumps the OG race only guys almost ALL run belt drive mechanical pumps. Us electric guys man there is some wildly varying approaches. Iirc mighty Mouse went 8's on three 255's dangling loose in the tank held together with hose and regular hose clamps.
I saw a thread once with a couple of well known aftermarket jumbo pumps taken apart only to show a couple or three standard fuel pumps in there so?
I was almost all set on using a couple of Bosch pumps but they have become so prone to knock offs its hard to find real ones. In personal use I have had excellent results with the 255 walboros in terms of durability and good pressure. Maybe thats the way to go?
Be interesting to see what you end up using here. Still lots for us to learn
Fun times putting a car like this together
Last edited by cam; 11-02-2017 at 02:57 PM.
#102
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
I won't go to a belt drive pump, I won't be at that level.
Today I'm not planning to run mutiple 450s. Still researching.
Looking into Magnafuel and Weldon right now.
Today I'm not planning to run mutiple 450s. Still researching.
Looking into Magnafuel and Weldon right now.
#104
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
2035 or 2345
I talked to Jim Craig over there today, he said the 2035 can handle 1100rwhp on E85. I just asked about that model because a local contact is selling one.
Side note, I have to be honest, Over the last 20 years of LS modding, I've become way less of a spendthrift and much more of a miser. So talking about $1500 fuel systems is something I struggle with haha.
I talked to Jim Craig over there today, he said the 2035 can handle 1100rwhp on E85. I just asked about that model because a local contact is selling one.
Side note, I have to be honest, Over the last 20 years of LS modding, I've become way less of a spendthrift and much more of a miser. So talking about $1500 fuel systems is something I struggle with haha.
#111
Two true aem 380 mounted in tank Y'ed to one 8an feed to referenced reg have done well for me at 75psi base pressure. This is on e85.
#112
TECH Fanatic
#113
TECH Junkie
iTrader: (9)
AEM lists their Ethanol compatible pumps at 320LPH
Alc based fuels and flow through style pumps are not ideal. Makes me wonder why we dont see more brushless fuel pumps? More efficient, cheaper to make, and can seal the internals to avoid alc dissolution problems. There are some on market but they are pricey! The bigger/better aftermarket pumps isolate the motor from the pump similar to hydraulic pumps but again cost and size issues.
I'm thinking a flex fuel compatible OEM pump ganged up might be the most reliable for street guys on E85. AEM pumps seem to have considerably poor reviews on some of the sales boards, but thats heresay from me so...
I did some reading and id go one of two routes;
1. Worry free top choice - Weldon 2345 ( Approx $1250.00 )
2. Two or three Walboro 400/450 e85 pumps ( approx $150ea )
Cost ratio is pretty vast; 4:1 difference between the two approaches.
I did also find the magnafuel 4103 which looks to be well made and the little info I read on it said good things. Its priced decently at $750.00
Alc based fuels and flow through style pumps are not ideal. Makes me wonder why we dont see more brushless fuel pumps? More efficient, cheaper to make, and can seal the internals to avoid alc dissolution problems. There are some on market but they are pricey! The bigger/better aftermarket pumps isolate the motor from the pump similar to hydraulic pumps but again cost and size issues.
I'm thinking a flex fuel compatible OEM pump ganged up might be the most reliable for street guys on E85. AEM pumps seem to have considerably poor reviews on some of the sales boards, but thats heresay from me so...
I did some reading and id go one of two routes;
1. Worry free top choice - Weldon 2345 ( Approx $1250.00 )
2. Two or three Walboro 400/450 e85 pumps ( approx $150ea )
Cost ratio is pretty vast; 4:1 difference between the two approaches.
I did also find the magnafuel 4103 which looks to be well made and the little info I read on it said good things. Its priced decently at $750.00
Last edited by cam; 11-03-2017 at 07:41 AM. Reason: Added magnafuel
#114
I wish I would have skipped all the electric bull ****.... go belt driven and never think about your fuel system again.....my .02
#115
TECH Junkie
iTrader: (9)
I ran 1 4303 magnafuel, then 2......Now beltndriven off front, with rear cell....No cable, just use a single aem 340 for easy cranking.....shut that off when cruising, leave it on at track to back feed regulator on a hard 60ft....
I wish I would have skipped all the electric bull ****.... go belt driven and never think about your fuel system again.....my .02
I wish I would have skipped all the electric bull ****.... go belt driven and never think about your fuel system again.....my .02
#117
Electric for one are SUPER loud, cable is silent, you can hear more motor and turbo fun stuff. Also electric has a cap right of the bat, belt driven will support basically whatever evolving set up I choose. And lets be honest, you always end up wanting more power. 1 4303 on E85 was done at 900rwhp, probably earlier actually but we were leaning hard on it. Two 4303s behind 225 billet atomizers were at 85 percent duty around 1250rwhp.... As boost and fuel pressure rise, the electric pumps start sucking ***..... With a belt driven they start shining even more.....
I think people are scared of them for some reason but they are so far superior its not even close.
#118
TECH Junkie
iTrader: (9)
Two seperate feeds from the cell, mechanical pulls on its own. 1.2 60ft or better with a front belt pump and a rear cell you will starve the pump, which is why at the track I leave the 340 on to back feed the regulator. The benefit is way easier cranking as well, cruising around the street I shut the electric off as soon as it cranks.
Electric for one are SUPER loud, cable is silent, you can hear more motor and turbo fun stuff. Also electric has a cap right of the bat, belt driven will support basically whatever evolving set up I choose. And lets be honest, you always end up wanting more power. 1 4303 on E85 was done at 900rwhp, probably earlier actually but we were leaning hard on it. Two 4303s behind 225 billet atomizers were at 85 percent duty around 1250rwhp.... As boost and fuel pressure rise, the electric pumps start sucking ***..... With a belt driven they start shining even more.....
I think people are scared of them for some reason but they are so far superior its not even close.
Electric for one are SUPER loud, cable is silent, you can hear more motor and turbo fun stuff. Also electric has a cap right of the bat, belt driven will support basically whatever evolving set up I choose. And lets be honest, you always end up wanting more power. 1 4303 on E85 was done at 900rwhp, probably earlier actually but we were leaning hard on it. Two 4303s behind 225 billet atomizers were at 85 percent duty around 1250rwhp.... As boost and fuel pressure rise, the electric pumps start sucking ***..... With a belt driven they start shining even more.....
I think people are scared of them for some reason but they are so far superior its not even close.
#120