When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Getting ready to buy a catch can and would love some recommendations, not sure if I really need one with the external breather. Seems messy and doesn't look as clean on the install. Street driven and probably no more than 15lbs of boost on average.
Two right side valve covers each with an oil cap thread to 10an adapter. A 10an hose form each to a Moroso can stuffed with steel wool. No issues, been to 20 psi.
Here is mine. I should have taken pics when I built it, but it's 2.5 exhaust pipe with a cap on each end. Then there are dividers or baffles inside and the center where the hoses go in is stuffed with stainless steel scrub pads. Still need to throw some paint on it
Cheap *** amazon one for me. No steel wool, just goes through a small course screen before entering the can. It can be unscrewed and wool can be added if need be. Check valve on the intake side to prevent pressuring the can. Works great.
Excuse the comically long mounting bracket. One day ill make something better.
Getting ready to buy a catch can and would love some recommendations, not sure if I really need one with the external breather. Seems messy and doesn't look as clean on the install. Street driven and probably no more than 15lbs of boost on average.
Talk to David from Mighty Mouse,best thing you can do
Big fan of the Mighty Mouse PCV catch can here.
Works great, zero fumes and keeps my intake squeaky clean, plus David is always very helpful with any questions I have.
Another vote for the mighty mouse pvc can. I tried alot of other stuff but once i got my mighty mouse can have never had an issue since. And have never had to drain the can in 20,000 miles.
MMS here too on my turbo stain as well as my silverAYdo. Follow installation instructions, drain as needed. Both work flawlessly and wouldn't run either without his can.
I need one on my beater Honda but just can't make myself "mod" a 1.7L Honda Civic
Two right side valve covers each with an oil cap thread to 10an adapter. A 10an hose form each to a Moroso can stuffed with steel wool. No issues, been to 20 psi.
do u plug off the small vent tubes on the valve covers or do u put breathers on them also. Im doin this setup.
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.
Catch Can Selection 
