hehehe 
Chipping away...
Thread Starter
TECH Veteran
iTrader: (5)
Joined: Nov 2001
Posts: 4,491
Likes: 1
From: Olmsted Falls, OH
Chipping away... Local club had the track rented tonight, made some more passes 
First one was aborted when the car pulled itself outta the groove about 100 foot out. Not worth trying to stay in it at that point.
http://harlan-engineering.com/milan/aborted_run.wmv
Second pass:
60' - 1.415
1/8 - 5.759@124.61
1/4 - 8.896@157.32
http://harlan-engineering.com/milan/889.wmv
A little better than before, but it still just wasn't leaving like it should. I'm stuck w/ the wastegate spring pressure off the brake right now, and 7.5/8 psi just ain't doing it
They asked us nicely to run 1/8th miles from then on since i haven't got the chute mounted just yet
Third pass we tweaked the shocks a bit, and I leaned the car out a little. It's was actually dipping below 10:1 on the first full pass.
60 - 1.383
1/8 - 5.684@127.54
http://harlan-engineering.com/milan/568_8th.wmv
I sure wish i ran that one out
A nice wheels up launch on that pass, I didn't have the sack to stay in it completely. Wasn't expecting it to come up that hard
Fourth pass suspension was about the same, only a little less tire pressure. Just didn't 60' the same, and was a little squirmy on the big end. I ran it out anyway, as we were near the end of the night.
60' - 1.423
1/8 - 5.724 @ 126.70
1/4 - 8.821 @ 158.90
http://harlan-engineering.com/milan/882.wmv
We should be able to get some low 70's out of it next time out, but i'm really interested in breaking the 160 MPH mark
Still only 20 psi for those interested
DERTY's working on the vids now
First one was aborted when the car pulled itself outta the groove about 100 foot out. Not worth trying to stay in it at that point.
http://harlan-engineering.com/milan/aborted_run.wmv
Second pass:
60' - 1.415
1/8 - 5.759@124.61
1/4 - 8.896@157.32
http://harlan-engineering.com/milan/889.wmv
A little better than before, but it still just wasn't leaving like it should. I'm stuck w/ the wastegate spring pressure off the brake right now, and 7.5/8 psi just ain't doing it
They asked us nicely to run 1/8th miles from then on since i haven't got the chute mounted just yet
Third pass we tweaked the shocks a bit, and I leaned the car out a little. It's was actually dipping below 10:1 on the first full pass.
60 - 1.383
1/8 - 5.684@127.54
http://harlan-engineering.com/milan/568_8th.wmv
I sure wish i ran that one out
A nice wheels up launch on that pass, I didn't have the sack to stay in it completely. Wasn't expecting it to come up that hard
Fourth pass suspension was about the same, only a little less tire pressure. Just didn't 60' the same, and was a little squirmy on the big end. I ran it out anyway, as we were near the end of the night.
60' - 1.423
1/8 - 5.724 @ 126.70
1/4 - 8.821 @ 158.90
http://harlan-engineering.com/milan/882.wmv
We should be able to get some low 70's out of it next time out, but i'm really interested in breaking the 160 MPH mark
Still only 20 psi for those interested
DERTY's working on the vids now
Last edited by y2khawk; Aug 13, 2004 at 12:09 AM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Matt thats some crazy stuff. How much you think you can get out of this setup before you have to go bigger? 8.60s? Maybe faster?
Last edited by maddboost; Aug 12, 2004 at 11:27 PM.
Thread Starter
TECH Veteran
iTrader: (5)
Joined: Nov 2001
Posts: 4,491
Likes: 1
From: Olmsted Falls, OH
Originally Posted by JZ 97 SS 1500
Very nice indeed. Great mph... What weight is the car at now??
Jose
Jose
9 Second Club
Joined: Jul 2003
Posts: 1,195
Likes: 0
wow, that is awesome Harlen. I hope you get down to compete with the record. I am sure the bar will be raised here very shortly but you are on a bad *** curve to the top.
PS. Can I get my 2step so I can go that fast. I ordered 2 of them about 4 months ago. LOL
I know you are busy.
PS. Can I get my 2step so I can go that fast. I ordered 2 of them about 4 months ago. LOL
I know you are busy.
Thread Starter
TECH Veteran
iTrader: (5)
Joined: Nov 2001
Posts: 4,491
Likes: 1
From: Olmsted Falls, OH
Originally Posted by GueSS Who
PS. Can I get my 2step so I can go that fast. I ordered 2 of them about 4 months ago. LOL
I know you are busy.
I know you are busy.
