Belt Rubbing From Hell!!!!!
Belt Rubbing From Hell!!!!! AHHHHHHH!!!!! I AM GONNA SHOOT MYSELF. The 4.25 pulley and all if it's hugeness some how somewhere the belt rubs. IT ATE ANOTHER BELT!!! another 30 down the drain so now i need to find out where it rubs.... AGAIN and do the whole tensioner thing again. THIS SUCKS~!!!!! just venting 
Is the support that SDCE sent with it on or does it not fit with the 4.25" pulley??? I forgot to put it on mine and the bracket was flexing and eating up the belt....... not bad enough to ruin it but it was eating it ...... the blower chattered also..... put the other bracket on that attaches to the oil pan and it was all good...... didnt you say scot was going to make u a different bracket or something.......
Let us know......
Kyle
Let us know......
Kyle
yeah i have to check both this teim really carefully, this is starting to suck a lot, But see this time I lost one of the washers for the outrig thing on the idler pulley so it was closer and more of the belt was to ****, sooo i think i need to add 2 and it should be fine. cause one it cracked less so 2 washers more should be good than right???
Trending Topics
Originally Posted by osuhunter07
yeah i have to check both this teim really carefully, this is starting to suck a lot, But see this time I lost one of the washers for the outrig thing on the idler pulley so it was closer and more of the belt was to ****, sooo i think i need to add 2 and it should be fine. cause one it cracked less so 2 washers more should be good than right???
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo hmmm so i thought it could be allignment. So i added another washer to the top left and now the belt jumped over towards the engine 2 ribs. So i guess that moved to far. GAYYYYYYYYYYY
are you running different washers on each standoff??? Your last statement is throwing me, you said you added one to the top left? I think it should be an even amount of spacers per standoff.
Originally Posted by osuhunter07
what is the easiest way to check allighnment?
Straight edge.... have Scott or Wendy send you one when they send you the new bracket for the 4.25" pulley.
Kyle
On The Tree
Joined: Apr 2004
Posts: 196
Likes: 0
From: northeast
Hi Nick,
It did ship already...you should see it any day??
I'll pm you the track #
It does sound like something's not quite lined up...let's walk thru it and get her fixed. Get that brace on there, and put the correct washers on there...if you need us to send you more shims, let me know. Give me a call and we'll talk about it...
wendy
It did ship already...you should see it any day??
I'll pm you the track #
It does sound like something's not quite lined up...let's walk thru it and get her fixed. Get that brace on there, and put the correct washers on there...if you need us to send you more shims, let me know. Give me a call and we'll talk about it...
wendy
Originally Posted by osuhunter07
she said she was gonna ship out the new bracket last wensday but still not here
Originally Posted by SDCE
Hi Nick,
It did ship already...you should see it any day??
I'll pm you the track #
It does sound like something's not quite lined up...let's walk thru it and get her fixed. Get that brace on there, and put the correct washers on there...if you need us to send you more shims, let me know. Give me a call and we'll talk about it...
wendy
It did ship already...you should see it any day??
I'll pm you the track #
It does sound like something's not quite lined up...let's walk thru it and get her fixed. Get that brace on there, and put the correct washers on there...if you need us to send you more shims, let me know. Give me a call and we'll talk about it...
wendy
See now thats customer Service.....
Kyle