I guess it's your cash. 
SS J and U bends
I ruin the end of films...
iTrader: (2)
Joined: Nov 2002
Posts: 1,545
Likes: 0
From: Taking back some video tapes
Not a sponsor, but it's the place I direct the FMIC DIY'ers like myself and quiet a few others.
Performance Curve.
You will need about 3 of these multi bends to complete the job but its well worth it.
http://www.performance-curve.com/ind...S&Category=345
I just cut what I needed and had some SS left over for whatever so it works out pretty well for the money spent.
J
Performance Curve.
You will need about 3 of these multi bends to complete the job but its well worth it.
http://www.performance-curve.com/ind...S&Category=345
I just cut what I needed and had some SS left over for whatever so it works out pretty well for the money spent.
J
Thread Starter
TECH Fanatic
iTrader: (9)
Joined: Nov 2004
Posts: 1,376
Likes: 0
From: Bucks County, PA
Originally Posted by mongse
Thread Starter
TECH Fanatic
iTrader: (9)
Joined: Nov 2004
Posts: 1,376
Likes: 0
From: Bucks County, PA
Originally Posted by frcefed98
Not a sponsor, but it's the place I direct the FMIC DIY'ers like myself and quiet a few others.
Performance Curve.
You will need about 3 of these multi bends to complete the job but its well worth it.
http://www.performance-curve.com/ind...S&Category=345
I just cut what I needed and had some SS left over for whatever so it works out pretty well for the money spent.
J
Performance Curve.
You will need about 3 of these multi bends to complete the job but its well worth it.
http://www.performance-curve.com/ind...S&Category=345
I just cut what I needed and had some SS left over for whatever so it works out pretty well for the money spent.
J
Last edited by SS2win; Dec 18, 2005 at 09:04 AM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Fanatic
iTrader: (9)
Joined: Nov 2004
Posts: 1,376
Likes: 0
From: Bucks County, PA
Originally Posted by Arkangel77
Anyone know where you could get some mild steel stuff for a decent price?
anyone got a clue on what ezactly you need to compleat the the piping with an OBX? Like how manny U's, J's, and Streight pieces? Just figured you guys might know from experiance., I want tomake sure I buy enoughf but NOT too much?
Well from experience, 3 of those multibends will do the OBX FMIC install with minimal leftovers.....depends on what type of induction you have and what type of car....LT1 might require more or less...
But I used 2 of those multi bends but 3 would have been perfect(had to buy a few bends locally). If you have a little left over then you can use that to make adjustments or whatever.
I chose stainless because, no rust, no need to paint it or coat it as it sheds heat quickly and can be polished to a great shine. Its also pretty easy to weld up. Mild steel mandrel bends can also be pricey. NAPA carries em, but be prepared to spend $20-30 per bend on 3 inch stuff.
Hope this helps
But I used 2 of those multi bends but 3 would have been perfect(had to buy a few bends locally). If you have a little left over then you can use that to make adjustments or whatever.
I chose stainless because, no rust, no need to paint it or coat it as it sheds heat quickly and can be polished to a great shine. Its also pretty easy to weld up. Mild steel mandrel bends can also be pricey. NAPA carries em, but be prepared to spend $20-30 per bend on 3 inch stuff.
Hope this helps
DAMN! Road race eng, has some pretty steep prices on bends, 30 bucks for ONE 90 DEG 3.0 BEND? Grab bag o bends, no choice on what you get for 150 bucks?
Those muti bends are the ticket for this project, 39 bucks click the link to see how many bends you can cut from those.
IF you bought 3 multi bends, you can get
6- 90deg bends
3- 45deg bends
3- 12-14in straights
in all 3 inch STAINLESS STEEL
9 bends plus 3 straights all for 120 bucks, plus you know what bends you are getting.
I can only show you guys where to get this stuff for cheap, you do the math.
Those muti bends are the ticket for this project, 39 bucks click the link to see how many bends you can cut from those.
IF you bought 3 multi bends, you can get
6- 90deg bends
3- 45deg bends
3- 12-14in straights
in all 3 inch STAINLESS STEEL
9 bends plus 3 straights all for 120 bucks, plus you know what bends you are getting.
I can only show you guys where to get this stuff for cheap, you do the math.
Thread Starter
TECH Fanatic
iTrader: (9)
Joined: Nov 2004
Posts: 1,376
Likes: 0
From: Bucks County, PA
Originally Posted by frcefed98
DAMN! Road race eng, has some pretty steep prices on bends, 30 bucks for ONE 90 DEG 3.0 BEND? Grab bag o bends, no choice on what you get for 150 bucks?
Those muti bends are the ticket for this project, 39 bucks click the link to see how many bends you can cut from those.
IF you bought 3 multi bends, you can get
6- 90deg bends
3- 45deg bends
3- 12-14in straights
in all 3 inch STAINLESS STEEL
9 bends plus 3 straights all for 120 bucks, plus you know what bends you are getting.
I can only show you guys where to get this stuff for cheap, you do the math.
Those muti bends are the ticket for this project, 39 bucks click the link to see how many bends you can cut from those.
IF you bought 3 multi bends, you can get
6- 90deg bends
3- 45deg bends
3- 12-14in straights
in all 3 inch STAINLESS STEEL
9 bends plus 3 straights all for 120 bucks, plus you know what bends you are getting.
I can only show you guys where to get this stuff for cheap, you do the math.