How much boost????????
How much boost???????? I have a custom procharger D!SC setup with front mount intercooler and a 4.0 pulley. I have mac shorties with an x-pipe with cats and billets out the back. 42 lbs ionjectors, I also have a 230/237 cam with a 112lsa and was wondering how much boost will I see with the following pulleys =
4.0
3.4
3.2
hope to hear from u guys.....
4.0
3.4
3.2
hope to hear from u guys.....
On The Tree
Joined: Nov 2001
Posts: 179
Likes: 0
From: Richmond, KY
boost is going to be dependant upon a number o fthings... but primarily rpm of the blowers impeller... if you call ATI they can calculate the exact boost based on RPM and pulley size (crank and blower) . They can also give you an idea as to what max engine rpm you'll be able to crank the blower before the impeller speeds max out. Be a good idea to get in touch with them so you can plot out where you'll make maximum boost at any given rpm and gear range... imo 
Why is everyone so concerned about boost numbers. Do you realize that boost is a measure of resistance. If you take a totally stock engine and put a supercharger on it with an X diameter pulley, you will see lets say, 10psi and make 350rwhp. I am just throwing numbers out.
Take the same blower setup, same pulley, but put it on an engine with a blower cam, and great flowing heads, and you may see only 6psi on your boost gauge. The difference is that you will be making MORE power at LESS boost.
Also lets not forget our chemisty class. As pressure goes up, so does heat. Heat is your enemy as far as power is concerned
Andrew
Take the same blower setup, same pulley, but put it on an engine with a blower cam, and great flowing heads, and you may see only 6psi on your boost gauge. The difference is that you will be making MORE power at LESS boost.
Also lets not forget our chemisty class. As pressure goes up, so does heat. Heat is your enemy as far as power is concerned
Andrew
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I make 4-5lbs with a 4'' pulley.
B1 Cam (221/221 114 .558)
Headers
O/R Y
Hooker muffler.
I dont know how the front mount will affect the number.....I still have the stock duals
B1 Cam (221/221 114 .558)
Headers
O/R Y
Hooker muffler.
I dont know how the front mount will affect the number.....I still have the stock duals
10lbs for a 4.00 pulley seems a little to high. I am hoping to run a max of 8lbs with the FMIC and above mods. Besides the cam all I have are 918 springs and hardened pushrods everything else is stock Its a 2002 m6.
