cooling ?
Thread Starter
Staging Lane
Joined: Mar 2005
Posts: 80
Likes: 0
cooling ? Hey installed a procharger on a 99 trans am , couple months ago , everything has been fine, until recantly i used the ac for the firt time and the car ran hot???? any ideas ??? can someone also send me the CORRECT wiring diagram for the procharger fan ??? thanks
Just turn your car on, wait for the fan to turn on. Put your hand in front of the radiator. If the fan is pushing towards the front of the car flip the wires to that fan, it will reverse it's direction.
The old ATI fan setup didn't work so well in warmer temps on some cars. Alot of folk did some custom work or went with Be Cool fans.
I run a custom fan setup to keep mine cool.
The old ATI fan setup didn't work so well in warmer temps on some cars. Alot of folk did some custom work or went with Be Cool fans.
I run a custom fan setup to keep mine cool.
duel spal pushers Hey moto, i did a search and SSoramac has duel spal pushers on his, i think pushing through his ac condenser. Id pm him about price, part # and clearance tech. There are probably others. My single was like 120.00. They are somewhere over 200.00 i think?? I put foam tubing from ace hardware around my shroud edge, just got some too large and wedged it in, you might consider this around the edge of the shroud, and between the edge of the condenser and rad, to minimize volume loss. Some clear silicone will help hold it, it only takes spaced single drops, and you can hardly see it.
Last edited by BOONE; Jun 16, 2005 at 02:16 PM.
Trending Topics
I use a flex-a-lite fan. It is a twin 12" unit. Cost me 236.00 from summit. Part # FLX210. It blows REAL hard and it is a real slim unit. Cant be more then 2" thick. You can definatly fit it on the backside of hte ac radiator and have clearance. It has teh gasket goin around it so it seals real well. I believe it came with a thermostat also. It is a real nivce setup. GL man
John
John
Last edited by 99SS-T; Jun 16, 2005 at 02:26 PM. Reason: opps
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Teching In
Joined: Apr 2005
Posts: 1
Likes: 0
From: NJ
Originally Posted by 99SS-T
I use a flex-a-lite fan. It is a twin 12" unit. Cost me 236.00 from summit. Part # FLX210. It blows REAL hard and it is a real slim unit. Cant be more then 2" thick. You can definatly fit it on the backside of hte ac radiator and have clearance. It has teh gasket goin around it so it seals real well. I believe it came with a thermostat also. It is a real nivce setup. GL man
John
John