twinturbo setup need 2 bov's??
twinturbo setup need 2 bov's?? probably a stupid question but i am posting for a friend that wondered. he didnt know if u could go with just one or if u needed to have two.. this is on an ls1 motor. and he is running a maf so from what i read the bov needs to be infront of where the maf is mounted right? any other things i need to know??
hey thanks guys!! thats what i figured but i need to make sure.. and am i correct that it has to before the maf?? i know the tial is pretty quite how does the turbonetics sound? anyone have any pics of where they placed theirs at? thanks a ton..
now i know this is going to sound dumb but i have heard some that are more of a whip sound and some that are psssshhhh sound.. is the turbonetics more of a psshh sound?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
we have pretty much decided on either the tial or the godzilla.. i dont know if anyone has ever checked out www.slowboyracing.com but they have quite a few bov's on there.. i know they are a busher site but hey we need our parts from somewhere right??? we are going to start out pretty low on the boost until the new motor is ready probably right around 8 lbs. will we have any problems running such a big bov with lower amounts of boost? i am really leaning towards the godzilla i think its comes complete with everything to mount it up.. wish i could find a sound clip of it.. also i have searched and searched but i cant find any info on where the best spot to mount will be.. i know before the maf but i guess anywhere between the ic and the maf??
Staging Lane
Joined: Oct 2005
Posts: 73
Likes: 0
Slowboy isn't a Buschur site, they have nothing to do with them. I also vote for the TiAl BOV. They really are top notch. I bought an HKS before the TiAl came out, but my roommate has a TiAl on his and we both have TiAl 40mm wastegates on our cars. I just run a little 65 lb/min turbo though.
are u guys saying the tial because u are all using them.. i know nothing really lol so i am taking all your advice.. i have heard good about both nothing bad about either.. why is one better then the other??
Staging Lane
Joined: Oct 2005
Posts: 73
Likes: 0
I don't know if the godzilla is any better (I have only put the Raptor on a few cars), but I am unimpressed with most of Turbonetic's WG's and BOV's. They aren't terrible, but TiAl is definately of higher quality. I am sure either would work for you though. I do like the V-band on the Godzilla.
I ruin the end of films...
iTrader: (2)
Joined: Nov 2002
Posts: 1,545
Likes: 0
From: Taking back some video tapes
I'm running a single 50 on my setup and it *should* be fine. They're not your average 60-1s either though. If I have to run a second one or switch to a bigger HKS, I will.
