best of luck with everything 
67 Camaro's 104MM Update
Thread Starter
TECH Veteran
iTrader: (13)
Joined: Nov 2001
Posts: 4,647
Likes: 1
From: Sioux Falls, SD
67 Camaro's 104MM Update All the plumbing is done. AEM has 4 wires left. Oil is in. Twin Radiators are full. Sunday is "D" day.
104MM turbo on completely harden Dart engine. The best of the best. Twin BOV, Twin waste gates. Air-to-water intercooler (sets in back of the passenger seat).
Goal: 1500-1700 rwhp.
I have attached a couple of pictures of Excessive AutoSports' newest project.
Track times will have to wait until next year.
David
104MM turbo on completely harden Dart engine. The best of the best. Twin BOV, Twin waste gates. Air-to-water intercooler (sets in back of the passenger seat).
Goal: 1500-1700 rwhp.
I have attached a couple of pictures of Excessive AutoSports' newest project.
Track times will have to wait until next year.
David
Thread Starter
TECH Veteran
iTrader: (13)
Joined: Nov 2001
Posts: 4,647
Likes: 1
From: Sioux Falls, SD
Sorry about the "rattle" pictures. But if you seen this monster you would shake also.
Whistler. I'll try to get a "head on" picture. There is radiator supports, but just very well fabricated. Joey did one heck of a job on the entire fab part. All the piping is custom fab from the shop.
David
Whistler. I'll try to get a "head on" picture. There is radiator supports, but just very well fabricated. Joey did one heck of a job on the entire fab part. All the piping is custom fab from the shop.
David
Trending Topics
Teching In
Joined: Dec 2003
Posts: 41
Likes: 0
From: Sioux Falls, SD
The radiator support is ahead of the radiators. The turbo is actually a 106 dave. there is two electric water pumps mounted on the subframe one for each radiator. The car is being built to be "street driveable" to take it to the local cruise nights so a good cooling system was a must. Fuel system and intercooler is built around a 2400hp max so we can use all that the turbo offers. 
Ps if you think he shakes while taking picts you should have seen dave after his bumper standing pass.
Ps if you think he shakes while taking picts you should have seen dave after his bumper standing pass.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
TECH Veteran
iTrader: (13)
Joined: Nov 2001
Posts: 4,647
Likes: 1
From: Sioux Falls, SD
Thanks for all the great compliments. Chad (the owner of the 67) would love to see these comments. Chad and Joey have really come up with some "new" mods to make this one sweet "street" car. The start up did not happen this weekend, but soon. Chad (and the rest of us) can't wait to hear this beast ;D
Davaid
Davaid
Thread Starter
TECH Veteran
iTrader: (13)
Joined: Nov 2001
Posts: 4,647
Likes: 1
From: Sioux Falls, SD
Originally Posted by Got Me SOM
do you have pics of the whole car?
that thing is gonna flllllllllly!
that thing is gonna flllllllllly!
No but I'll take a few in the next couple of days for posting..
