Update on my Twin-T67, 408 Build
04-16-2006, 08:09 PM
#81
Originally Posted by NA$TY-TA
Looking bad *** David. Rob needs to keep safe over there....... we all need to meet up again and set more of Tony's cars on fire like we did at Thunder..
That was me and Toonz...
Be sure to take some pic's at the show.
Kyle
That was me and Toonz...
Be sure to take some pic's at the show.
Kyle
I haven't heard **** from Tony in a long time. Keep us up-to-date on if and when Thunder is going to happen. Eric (Next) said is chomping at the bit to get back there. It is to bad that the LS1 Tech series was cancelled (understandable but regretable).The show actually is not all that great. The shop cars were a hit. The 67 Turbo (T106MM) and mine were busy all most the entire weekend. Pretty cool
. I didn't take 1 picture at the show. Again, why when we have the best in the area anyway 
.The SS is almost ready to fire. Absolutely can't wait. I will get some video of the dyno tune session.
Also the 67 Camaro is running. Believe it is schedule to be final tuned next week. Now that is a bad *** sounding car. Full muffler system. It will be a "sleeper"
. Believe it will be "de-tuned" to 1500-1600 RWHP. Mine will be ONLY 1000RWHP.
David
Thanks again guys.
04-17-2006, 07:27 AM
#84
Originally Posted by gnx7
Can't wait to see what kind of power that beast puts down!
Is the RX-7 in the left side of the picture a V8 conversion?
Is the RX-7 in the left side of the picture a V8 conversion?
Nope. Just a new roter engine. The kid bought an engine management that can't be tuned. I believe it is from Britian or something.
We do have 2 other ones being done. But no V8 - just 1 doing a Supra engine (with turbo) swap.
David
04-19-2006, 02:07 AM
#87
TECH Regular
iTrader: (11)
Join Date: Nov 2005
Location: DFW Tx
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Navy David SS
I'm impressed. By your signature do you own a MR2? Where are you from? My son owns a MR2. Turbo'd (T-76), very quick little car. Ran a best of 10.93 at 130+ last year.
Good Luck. Looks like 2008 or 9 will be the next gen Camaro.
David
Good Luck. Looks like 2008 or 9 will be the next gen Camaro.
David
Sergey
04-19-2006, 07:29 AM
#88
Originally Posted by MR2liter
Ha thanks. Its nothing compared to your ride but its been a project of mine for the last 3 years. Its finally starting to see some nice hp. Im from Dallas TX, What is your sons name? also got any pics of the 10 second duece.?
Sergey
Sergey
David
04-19-2006, 09:49 PM
#90
Originally Posted by NA$TY-TA
Like Father like son........ Turn him from the Dark side Dave...... get him a F-Body...
Kyle
Kyle
David
04-20-2006, 12:08 AM
#91
Is it going to be ready for the opening weekend? I cant wait to see it. Your car has been my favorite ever since I started going to Thunder Valley a few years ago. Keep up the good work.
04-20-2006, 07:26 AM
#92
Originally Posted by BLK85
Is it going to be ready for the opening weekend? I cant wait to see it. Your car has been my favorite ever since I started going to Thunder Valley a few years ago. Keep up the good work.
Nope. We'll have to wait until next weekend. We don't want to go until the car is 100% ready. Still waiting on the paracute.
David
04-20-2006, 08:47 AM
#93
TECH Apprentice
iTrader: (2)
Join Date: Aug 2005
Location: Redding, Ca
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Navy David SS
Nope. We'll have to wait until next weekend. We don't want to go until the car is 100% ready. Still waiting on the paracute.
David
David
Any videos yet? That thing is a beautiful car.
04-20-2006, 01:00 PM
#94
Originally Posted by boonesjgsilverado
Any videos yet? That thing is a beautiful car.
Thanks
David
04-21-2006, 02:08 AM
#95
TECH Regular
iTrader: (11)
Join Date: Nov 2005
Location: DFW Tx
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Navy David SS
My son's project has been his/my project for the last 5-6 years. We added a air-2-water intercooler and bigger cams this year. Waiting on him to get his clutch (needs something to hold up to the power he puts down). He'll back to the track this year sometime. Here's a couple pictures of his ride.
David
David
Its running the same turbo as me, the Greddy T78.
I actually have a Fairly new twin plate clutch and throwout bearing for the mr2 for sale. Its an HKS unit. PM me if you are interested.
04-22-2006, 12:50 AM
#97
TECH Resident
iTrader: (2)
Join Date: Mar 2005
Location: strong island, NY
Posts: 750
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Navy David SS
Thanks. My sponsor and shop owner/fabricator, is being very picky on final set-up. Goals are 1000rwhp, mid-8's. It will see very limited street duty - cruise nights 
We've made some 'friends' in the local police department - hopefully that will help us. Should be able to make our deadline of the Easter car show in 2 weeks.
Here's the hot parts that we got jet-coated
David
We've made some 'friends' in the local police department - hopefully that will help us. Should be able to make our deadline of the Easter car show in 2 weeks.Here's the hot parts that we got jet-coated
David
sick!
04-27-2006, 12:00 AM
#99
Teching In
Join Date: Mar 2004
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Coating's Navy David SS nice work, i hate to burst your bubble though on your header coating's and turbo coating's. I noticed you did them in sterling, that coating will be gone and will dull out very soon and look like ****. Take it from me i've allready been there. I have one vehicle that make's 1350RWHP and another that make's 900RWHP both are twin turbo Chevy's. You have to do your manifold's and turbo's in high heat grey, black, or blue 2000 degree, then you do intercooler piping and intake piping in sterling, what you used on everything. The sterling is only good for 1300 those turbo's and manifold's will turn to **** real quick. Either way though good luck.