Victor Jr.
#1
TECH Resident
Thread Starter
iTrader: (20)
Join Date: Sep 2004
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have decided to move up from a ls6 to a Victor Jr. intake on the T88 turbo 391 LS2 after doing some research. I think it would be beneficial. I've also read that some people have had some trouble. Where is the best place to get one? I would like an elbow that wouldn't require any hod modifying or milling.. I read that Tiago used Speed inc. fuel rails instead of the edelbrock ones. How much more beneficial would this be? I know that the Speed Inc. ones are a little larger.. How well would it work? ANy other input? THANKS
#4
TECH Resident
Thread Starter
iTrader: (20)
Join Date: Sep 2004
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Tiago
the speed inc rails are 1/2" ID (maybe even 5/8") while the edelbrok were 3/8", so I kept my speed inc rails on it, just took a couple of custom brackets ![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#5
On The Tree
iTrader: (13)
Join Date: Dec 2005
Location: Northen California
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just measured my Edelbrock fuel rails. They are indeed 1/2" inner diameter, not 3/8". The rails are threaded for -8 fittings, so I cannot imagine a flow restriction problem even with the largest injectors. The brackets that come with the kit work fine. You could spend a lot more for custom rails and brackets though if you wanted the "look".
Trending Topics
#9
TECH Regular
iTrader: (8)
Join Date: Apr 2003
Location: Smyrna, DE
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have been waiting months for my complete manifold w/ plenum, rails and TB from nasty performance, been on backorder forever. i cant wait till it comes in its gonna be wicked on my 408 T88 build.
#10
TECH Fanatic
iTrader: (9)
Join Date: Jun 2005
Location: Miami,Fl
Posts: 1,682
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
im building my home made kit soon using a t70 turbo around 7 psi daily driver.how much more power will i gain with the edelbrock over an ls6 manifold?i mean i have to buy the ls6 so if the edelbrock offers a power gain over the ls6 then i'll just buy the edelbrock
#13
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Slowhawk,
That's a cool setup you have there. Will that fit under a C5 hood? I'm looking at a cowl hood with a 3'' rise to it, I'm sure that should clear the setup you have. I may go this route also so please keep me in the loop as to how it's work out for you.
Thanks,
Dave
That's a cool setup you have there. Will that fit under a C5 hood? I'm looking at a cowl hood with a 3'' rise to it, I'm sure that should clear the setup you have. I may go this route also so please keep me in the loop as to how it's work out for you.
Thanks,
Dave
#14
LS1Tech Sponsor
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by dacajun
Slowhawk,
That's a cool setup you have there. Will that fit under a C5 hood? I'm looking at a cowl hood with a 3'' rise to it, I'm sure that should clear the setup you have. I may go this route also so please keep me in the loop as to how it's work out for you.
Thanks,
Dave
That's a cool setup you have there. Will that fit under a C5 hood? I'm looking at a cowl hood with a 3'' rise to it, I'm sure that should clear the setup you have. I may go this route also so please keep me in the loop as to how it's work out for you.
Thanks,
Dave
#15
TT-TECH Veteran
iTrader: (29)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Slowhawk
Here are some pics of the Victor with Intake Elbow's.com 90' and rails.Don't go by the fuel system sice it's for a Vette ![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#16
On The Tree
iTrader: (13)
Join Date: Dec 2005
Location: Northen California
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The LS6 intake has worked nicely with turbo applications. I have a customer with twin 60's and the LS6 intake that makes wicked power in his buggy. My thinking is that it might even be superior to the Victor Jr. in a lower boost, under 800 horsepower situation. The longer runner length may work to the advantage of quick response. Again, cam selection and how the parts work with each other determines a lot of the outcome. After saying all of that, I bought the Victor Jr. Costs less and is so easy to adapt to different applications - looks good on there too.
#18
On The Tree
iTrader: (1)
Join Date: Jun 2002
Location: DFW,TX
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by snketr
The victor jr doesn't have the problem of making #7 lean either, does it? That would be the biggest benefit to me. A little more "insurance"