vortech T Trim
10 Second Club
Joined: Apr 2002
Posts: 1,755
Likes: 2
From: Cincinnati, Ohio
I see your sig. says 12 lbs. with a 2.85 so I don't think the 2.75 will get you there. I know some guys have run a 2.50 but you would be way overspinning. I want 15 lbs. too, that's why I'm going to the YSi.
Can you say belt slip with a 2.50 pulley? And why would you want to overspin your blower that much? Hell I still havent figured out how in the hell he made so much TQ on a 346 730TQ? THATS LIKE A TURBO SETUP 
Ill be honest with you and say stick with what you have. Instead of a pulley swap get a YSI and be done with it. Yes you can modify the RMCR to the YSI.
Ill be honest with you and say stick with what you have. Instead of a pulley swap get a YSI and be done with it. Yes you can modify the RMCR to the YSI.
Originally Posted by Got Me SOM
he got the torque from the spray.
I'll be spraying mine too eventually.
I'll be spraying mine too eventually.
Trending Topics
Launching!
Joined: Apr 2002
Posts: 236
Likes: 0
Originally Posted by JMBLOWNWS6
Can you say belt slip with a 2.50 pulley? And why would you want to overspin your blower that much? Hell I still havent figured out how in the hell he made so much TQ on a 346 730TQ? THATS LIKE A TURBO SETUP Ill be honest with you and say stick with what you have. Instead of a pulley swap get a YSI and be done with it. Yes you can modify the RMCR to the YSI.
Ill be honest with you and say stick with what you have. Instead of a pulley swap get a YSI and be done with it. Yes you can modify the RMCR to the YSI.LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by Got Me SOM
who makes the 2.50 pulley?? I'm sorta overspinning my little G trim with my 2.75 
When you guys coming back to Fla?
When you guys coming back to Fla?
https://ls1tech.com/forums/forced-induction/510234-where-buy-pulleys.html
10 Second Club
Joined: Apr 2002
Posts: 1,755
Likes: 2
From: Cincinnati, Ohio
I guess the 2.50 pulley has to be custom made. I did not make the trip to Bradenton. My race car cohort Mark (BLWNTA) went down with the Ohio Boys. It looked like a good time, I saw the pics and vids.
Originally Posted by Got Me SOM
who makes the 2.50 pulley?? I'm sorta overspinning my little G trim with my 2.75
When you guys coming back to Fla?
When you guys coming back to Fla?
Originally Posted by 2001WS6Vert
I guess the 2.50 pulley has to be custom made. I did not make the trip to Bradenton. My race car cohort Mark (BLWNTA) went down with the Ohio Boys. It looked like a good time, I saw the pics and vids.
yea I talked to Mark, cool guy. Your race car is friggin sick!!
Me and Caveman want to come up and visit so you guys can take us to W2W
Originally Posted by NAVY
yas JMBLOWNWS6 , what can i do for you ?????
sorry JMBLOWNWS6 i’m vary busy .
sorry JMBLOWNWS6 i’m vary busy .
The TQ is on the spray? All the numbers in your sig are on the spray? Im just wondering 