Anyone know Phillip Bridges? (95 turbo TA)
09-09-2006, 05:35 PM
#1
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Anyone know Phillip Bridges? (95 turbo TA) I was looking at the Hot Rod PGD coverage, and this guy came in 6th. Info says he has a 95TA with a 88mm turbo and a SBC.
09-09-2006, 09:43 PM
#4
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Article says....
Says he went 8.96 first round..
380ci small block, AFR 227 heads, .672 lift roller cam... Owner says the car makes 1.100 hp at 7,200 rpms and has run quick as 8.81@160mph.
Says he went 8.96 first round..
380ci small block, AFR 227 heads, .672 lift roller cam... Owner says the car makes 1.100 hp at 7,200 rpms and has run quick as 8.81@160mph.
09-11-2006, 08:16 AM
#5
LS1Tech Premium Sponsor
iTrader: (6)
Join Date: Jun 2004
Posts: 1,619
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pro Stock John
Article says....
Says he went 8.96 first round..
380ci small block, AFR 227 heads, .672 lift roller cam... Owner says the car makes 1.100 hp at 7,200 rpms and has run quick as 8.81@160mph.
Says he went 8.96 first round..
380ci small block, AFR 227 heads, .672 lift roller cam... Owner says the car makes 1.100 hp at 7,200 rpms and has run quick as 8.81@160mph.
Lee Spicher
lee@bmrfabrication.com
(813)986-9302
09-11-2006, 09:07 AM
#6
Originally Posted by BMR Fabrication Inc.
He is a customer and good friend of ours. He had the car seriously detuned for pump gas...I have some pictures here of his setup i'll post them when I find them...
Lee Spicher
lee@bmrfabrication.com
(813)986-9302
Lee Spicher
lee@bmrfabrication.com
(813)986-9302
cooooll
Trending Topics
09-11-2006, 10:43 AM
#8
LS1Tech Sponsor
iTrader: (3)
Join Date: Nov 2001
Location: Mobile, AL
Posts: 1,001
Likes: 0
Received 0 Likes
on
0 Posts
pmbmax on this board. Good dude. I rode with him in the '05 PGD's But he broke a tranny cooler fitting and had to bow out that year.
__________________
1966 Chevy II twin turbo LS3 project
2016 Z07 Carbon
1966 Chevy II twin turbo LS3 project
2016 Z07 Carbon
09-11-2006, 03:43 PM
#12
TECH Resident
iTrader: (6)
Join Date: Nov 2004
Location: northeast Miss.
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pro Stock John
Well tell him that we are impressed! I see he has not been on here since last fall. 
Here's the video from it, captured by a local (and ls1tech member, mellon)
The racing footage starts about halfway into the video. The aspect ratio is a little funny but if you save the clip and manually make it 1:1 (or 5:5 ect..) it will make sense.
09-11-2006, 04:45 PM
#13
Originally Posted by GrahamHill
http://www.memphisracingscene.com/pp...=16079&cat=906
Here's the video from it, captured by a local (and ls1tech member, mellon)
The racing footage starts about halfway into the video. The aspect ratio is a little funny but if you save the clip and manually make it 1:1 (or 5:5 ect..) it will make sense.
Here's the video from it, captured by a local (and ls1tech member, mellon)
The racing footage starts about halfway into the video. The aspect ratio is a little funny but if you save the clip and manually make it 1:1 (or 5:5 ect..) it will make sense.
I saw some underhood pic's in that vid.... watching it now.
Kyle
