Iat??
Originally Posted by Bird-Of-Prey
You can use the IAT from the GMC Cyclone. It is the threaded one and I believe it's the same one that comes in the procharger kit. My local Autozone had one for under $20
thanks guys got one from advanced for 7 bucks
also would having this unplug cause a disruption in the map sensor
im showing a map sensor code check engine light never had one before and this iat sensor is the only one thats unpluged since the swap to my own kit other then the tti one
Last edited by SINISTER; Sep 12, 2006 at 09:03 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo You don't want to leave it unplugged. I don't think you can disable it nor do you want to. It's very important to know the actual intake temps because it plays a very important role in your ignition timing. The cooler the intake temp, the more the timing is advanced. Forget about the Ebay IAT mod. It's a joke and can only hurt you. With the IAT not reading you might get too much ignition timing and run into detination. Or worst case scenerio BOOM!
Teching In
Joined: Sep 2006
Posts: 11
Likes: 0
From: Lakewood, WA
you will definately want to plug your ait in, if you have ever looked at your bin file in your pcm you will see there is a spark as well as a fuel table that use the readings from that sensor to calibrate timing and fueling based on its readings.
