help GMPP intake
#1
help GMPP intake
I purchased a Edelbrock carb intake and elbow from intakeelbows.com. It did not fit under the hood of my 02 SS.Now I will try it with a GMPP intake, does anyone know for sure if that will fit under a SS hood? I emailed Aaron from intakeelbows.com and even he is not sure. any pics would be even better
Trending Topics
#12
Flossin' twin turbos
iTrader: (55)
Join Date: Jun 2004
Location: Chicago
Posts: 3,148
Likes: 0
Received 0 Likes
on
0 Posts
oh its just rubs from the movement of the motor. on my car i had to cut the lower part of the hood anyways, cause i have spacers under the engine mounts to make more room for the turbos. hope this helps
#13
yes it does, thanks for taking time to do this.
I can either keep the elbow and NW tbody and return the Edelbrock, get the GMPP. or return the elbow, keep the Edelbrock and NW tbody and get this one : https://ls1tech.com/forums/nitrous-oxide/404043-nitrous-outlet-ls1-intake-system.html.
Has anyone seen this elbow?
I can either keep the elbow and NW tbody and return the Edelbrock, get the GMPP. or return the elbow, keep the Edelbrock and NW tbody and get this one : https://ls1tech.com/forums/nitrous-oxide/404043-nitrous-outlet-ls1-intake-system.html.
Has anyone seen this elbow?
#16
TECH Enthusiast
Join Date: Jun 2006
Location: Enid, OK
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
so with this type of intake and elbow combo I take it the air mettering has been converted to speed density since I dont see a MAF? If you dont mind what the benefit of going speed density and ditching the MAF? Sweet looking setups, hope you get the elbow situation straightened out.
#18
so Iam keeping the Edelbrock and NW tbody and just ordered this http://www.nitrousoutlet.com/installs/install.asp?id=22